The Investigation on the Upconversion Excitation Processes with a Square Wave Laser Research on the Specific Solutions in Instantaneous Form for One Dimensional Equation of Heat Transfer in Biological Tissue Caused by CW Laser

  • 用方波激光激发研究上转换发光的激发过程连续波激光作用于生物组织中的一维瞬态热传导方程定解问题
  • 来源:互联网摘选更新时间:2025-01-20 12:31:03

  • 重点词汇
  • tissuen.(动植物的)组织;薄纸;面巾纸;
  • Research on研究, 探讨…;
  • CWabbr.The CW Television Network CW电视台;Continuous Wave Radar 等幅波雷达;Cold Welding 冷焊;Chemical Warfare 化学战;
  • waven.波浪,海浪;心潮,风潮;(声、光、无线电等的)波;冲击波;涌动的人/物;挥手;(头发的)波浪卷;
  • ofprep. 关于;属于…的;由…制成;
  • excitationn.<物>(原子获得高能量的)激发(过程);激动;(由刺激引起的器官、组织等的)应激反应;<电>励磁;
  • dimensionaladj.尺寸的;<物>量纲的;<数>因次的;维的;
  • withprep. 具有;和;用;有;以;跟;同;带有;使用;和…在一起;借;与…对立;关于;包括;因为;由于;与…方向一致;由…持有;为…工作;虽然;作为…的成员,为…所雇用;具有,有,带有;在…身上,在…身边;由于,因;在…那里,在…看来
  • onprep. (覆盖、附着)在…上;由…支撑着;在(运输工具)上;在(某一天);就在…之后;关于(事或人);(身上)带着;为(某团体或组织)的一员;吃;(表示方向)在,向,对;在,接近(某地);根据;以…支付;通过;与…相比
  • solutionsn.(solution的复数形式)解答;解决(办法);解释;[数]解法,解式;解决( solution的名词复数 );溶解;溶液;答案;
  • transfervt.使转移;使调动;转让(权利等);让与;
  • 相关例句
1、

As a preliminary approach, a crude non dimensional equation for the specific cake resistance was derived in dynamic filtration, and those factors which affected the specific resistance were discussed.

从理论分析入手,讨论了影响滤饼比阻大小的因素,并结合因次分析法得出动态过滤条件下比阻的准数关联式。

互联网摘选

2、

Research on the Specific Solutions in Instantaneous Form for One Dimensional Equation of Heat Transfer in Biological Tissue Caused by CW Laser

连续波激光作用于生物组织中的一维瞬态热传导方程定解问题

互联网摘选

3、

The alternating direction implicit ( ADI) scheme was used to solve the two dimensional equation.

二维模型采用隐式交替方向法(ADI)求解。

互联网摘选

4、

The function of the dimensional equation in identifying the relationship between physical quantities is also mentioned.

论述了量纲式配合普遍形式的物理方程在辨识物理量之间关系时的作用。

互联网摘选

5、

Mathematical model of dimensional tolerance of straight line based on variation along DOF

基于自由度变动的直线尺寸公差数学模型

互联网摘选

6、

Study on Dimensional Tolerance Inquiry and Label System of Plastic Mold Structural Part

塑料模具结构零件尺寸公差查询和标注系统的研制

互联网摘选

7、

A Design Method for Statistical Dimensional Tolerance

统计尺寸公差的设计方法

互联网摘选

8、

The Function and Control of the Statistical Dimensional Tolerance

统计尺寸公差的功能及控制

互联网摘选

9、

One is using dimensional tolerance and the other is profile tolerance.

一种意见是在建立了形位公差概念之后,应采用尺寸公差;

互联网摘选

10、

The research on the design methods of dimensional tolerance

尺寸公差若干设计方法分析

互联网摘选

11、

In recent years, enterprise standards are adopted in the selection and annotation of dimensional tolerance for mold parts.

近年来在企业中模具图纸尺寸公差与配合的选用和标注大量使用企业标准。

互联网摘选

12、

On the bases of variable universe adaptive fuzzy control, this article designs a single variable fuzzy controller with two dimensional using speed deviation and warp speed rate.

基于变论域自适应模糊控制理论,设计了以速度误差和误差变化率为输入的单变量二维模糊控制器。

互联网摘选

13、

Three Dimensional High Deviation Sidetracking Technique& By Taking 6-8 Sidetracking Well for Example

三维大斜度侧钻井钻进技术&以白6-8侧钻井为例

互联网摘选

14、

The results show that dimensional deviation less than 10 mm almost has no effects on the structural stiffness of the composite truss.

结果表明,10mm以下的几何尺寸误差对桁架结构刚度无明显影响,但对桁架承载能力有显著影响。

互联网摘选

15、

Dimensional precision control of powder injection molded parts and mathematic model

粉末注射成形产品的精度控制及其数学模型

互联网摘选

16、

Study on improvement of dimensional precision of plastic product

提高塑料件尺寸精度的研究

互联网摘选

17、

Results show that dimensional precision and surface quality are fine.

研究结果表明,其尺寸精度和表面质量良好。

互联网摘选

18、

Experimental study on welding under permanent magnetic field use of permanent magnet in enhancing the dimensional precision of electro chemical machining

永磁场对焊缝显微组织及焊接接头力学性能的影响永磁场提高电解加工尺寸精度的试验研究

互联网摘选

19、

The coupling agents can greatly reduced the apparent viscosity and improved the processability of the blends, and increased the shear rates when the blend changed to dilatant fluid.

偶联剂的加入能大大降低了体系的表观黏度,改善了体系的加工性能,提高了体系向膨胀型流体转变时的剪切速率。

互联网摘选

20、
  • 今日热词
  • 热门搜索

简答网英语词典(dict.jiandongshicai.cn)为您提供在线翻译英语词典单词大全英译汉汉译英等英语服务!可按单词字数词义分类查询。支持lj:关键词格式查询例句。

用户反馈
请选择反馈类型(可多选):
您的联系方式:(如需回复请填写联系方式)
反馈内容:
提交成功 小编会尽快处理
回到顶部
点击反馈