Development of Intelligent CNC Camshaft Grinding Machine Control Software and Research on the Camshaft Grinding Experiments

  • 智能凸轮轴磨床控制软件编制和加工试验研究
  • 来源:互联网摘选更新时间:2025-01-20 12:34:34

  • 重点词汇
  • controlvt. 控制;管理;限制;支配;
  • theart.这个;指已提到或易领会到的人或事物;指独一无二的、正常的或不言而喻的人或事物;用以泛指;与形容词连用,指事物或统称的人;用于姓氏的复数形式前,指家庭或夫妇;(指特定用途的事物)足够,恰好;每,一;当前的,本,此;(重读,表示所指的为知名或重要的人或事物)
  • machinen.机器,机械;机械般的人;核心;
  • developmentn.发展;成长;研制;开发;发展阶段;新进展;新建住宅区;
  • Research on研究, 探讨…;
  • camshaftn.凸轮轴;
  • softwaren.(计算机)软件;
  • CNCabbr.Computerized Numerical Control 电脑数值控制;新集装箱运输;
  • 相关例句
1、

The following description enables rapid troubleshooting of the camshaft drive.

遵循以下说明能够快速解决凸轮轴传动问题。

provided by jukuu

2、

To seal the camshaft housing cover, use only the approved sealant from the Porsche parts catalog!

若要密封凸轮轴室盖,请使用“porsche汽车零件目录”中批准的密封剂!

provided by jukuu

3、

Unclip cable duct on camshaft housing cover.

松开凸轮轴室罩上的电缆管。

provided by jukuu

4、

Install the camshaft housing cover on both cylinder banks installing cover for camshaft housing.

安装两个气缸组上的凸轮轴室盖安装凸轮轴室盖。

provided by jukuu

5、

Pay attention to the matching number to the camshaft bearing housing.

注意凸轮轴轴承座的匹配编号。

provided by jukuu

6、

Tighten central screws on the sprocket and camshaft controller to the prescribed final torque using a torque angle wrench.

用扭力角度扳手将链轮和凸轮轴控制器上的中央螺钉拧紧至规定的最终力矩。

provided by jukuu

7、

Turn the sensor wheel on the intake camshaft controller as far as it will go to the right.

转动进气凸轮轴控制器上的传感器轮,并将其尽可能移向右侧。

provided by jukuu

8、

Replace the diamond friction washer when removing the camshaft controller.

请在拆下凸轮轴控制器时更换菱形摩擦垫圈。

provided by jukuu

9、

It lays stress on the substitution of bush material, remedy of brake camshaft, improving of brake shoe roller and substitution of fixed pin bush, etc.

重点叙述了衬套材料的代用、制动凸轮轴的修复、制动蹄滚轮的改进以及固定销衬套的代用方法。

互联网摘选

10、

Sticking of Drum Brake Camshaft May Lead to Locking of Braking Application of IC Card to Taxis

鼓式制动器凸轮轴卡滞可导致制动抱死IC卡在出租汽车上的应用

互联网摘选

11、

Design of the NC Special Milling Machine for Brake Camshaft

制动凸轮轴数控专用铣床设计

互联网摘选

12、

Remove camshaft housing removing and installing camshaft housing.

拆下凸轮轴室拆卸和安装凸轮轴室。

provided by jukuu

13、

Pull the hall sender out of the camshaft housing.

将霍尔传感器拉出凸轮轴室。

provided by jukuu

14、

Refer to tools and tightening torques in chapter" removing camshaft housing"!

参阅章节“拆卸凸轮轴室”中的工具和拧紧力矩!

provided by jukuu

15、

Fit new seals for camshaft housing.

为凸轮轴室安装新密封件。

provided by jukuu

16、

Tighten the camshaft housing screws in the sequence shown.

按照所示顺序,拧紧凸轮轴室螺钉。

provided by jukuu

17、

Carefully put the camshaft housing on in a staight line.

小心地按直线放置凸轮轴室。

provided by jukuu

18、

Remove oil feed line from camshaft housing.

从凸轮轴室拆卸机油供给线。

provided by jukuu

19、

This paper describes the design method of the swinging master as the attachment in a camshaft copying lathe.

介绍了凸轮轴车床摆动靠模的设计方法。

互联网摘选

20、

Design of the Swinging Master in a Camshaft Copying Lathe

凸轮轴车床摆动靠模的设计

互联网摘选

  • 今日热词
  • 热门搜索

简答网英语词典(dict.jiandongshicai.cn)为您提供在线翻译英语词典单词大全英译汉汉译英等英语服务!可按单词字数词义分类查询。支持lj:关键词格式查询例句。

用户反馈
请选择反馈类型(可多选):
您的联系方式:(如需回复请填写联系方式)
反馈内容:
提交成功 小编会尽快处理
回到顶部
点击反馈