No, you just crank up the handle to power it up.

1、

The crank handle is rotated to lead a screw to rotate through an umbrella wheel.

转动摇把，通过伞轮使螺杆转动。

互联网摘选

2、

Dynamic stability analysis of a slider-crank mechanism with elastic effects

具有弹性效应的曲柄滑块机构的动态稳定性研究

互联网摘选

3、

Design the Slide Crank Mechanism According to the Optimum Transmission

按传动最有利条件设计曲柄滑块机构

互联网摘选

4、

Optimal Design of Planar Slide Crank Mechanism with Transmission Force Property

平面曲柄滑块机构传力性能优化设计

互联网摘选

5、

Crank mechanism design provides strong pressure with little loss;

曲肘机构设计，压缩空气消耗少，压力强劲。

互联网摘选

6、

Calculation formulas are established based on the functions of given movement and dynamical conditions by means of extremum theory, making analytical design of an offset slider crank mechanism more convenient and good for extend.

本文根据偏置曲柄滑块机构的运动特性和传力特性所建立的函数关系，运用极值理论推导出给定条件下传力特性最佳的计算公式，大大方便了设计应用，值得推广。

互联网摘选

7、

Because the trough movement is a standard crank mechanism, the movement equation on the displacement ( s), speed ( v), acceleration ( a) and time ( t) was established.

往复槽锅为一典型的对心曲柄滑块机构，写出了位移S、速度V和加速度a与时间t的运动方程。

互联网摘选

8、

This paper describes the distribution of surface hardened layer and analyses of the residual stress in the nodular graphite cast iron crank shaft with its Journal and arm corner hardened simultaneously by high frequency induction heating.

本文叙述了对球墨铸铁曲轴轴颈与园角部位同时高频淬火后获得的硬化层分布，以及硬化层中残余应力分析。

互联网摘选

9、

The fillets of crank pin and main journal have a relatively weak strength. In establishing the grid model for crankshaft, these fillets need to be refined.

曲柄销与主轴颈的圆角为强度较薄弱部位，在建立曲轴网格模型时，需要对这些圆角处进行细化。

互联网摘选

10、

Crank Rocker Mechanism on Journal Bearing

滑动轴承上的曲柄摇杆机构

互联网摘选

11、

Study on the Tribological Behavior of Bushing-Crank Journal Rubbing Pair of Engine

内燃机轴瓦-曲轴轴颈摩擦副摩擦学性能研究

互联网摘选

12、

We're unable to crank landing gear down.

我们无法摇下起落架。

互联网摘选

13、

The disadvantage that non-geometry engineering information can not be expressed by geometry model is solved by definition, classification of feature and foundation of feature lib. And this is the base to generate various similar complex component of the crank gear and the base to information reapplication.

通过特征的定义、分类及特征库的建立，解决几何模型无法表达非几何工程信息的缺点，并且为曲柄连杆机构中复杂的各种相似零件模型的计算机辅助生成，和信息的重复使用提供实现基础。

互联网摘选

14、

The kinematics characteristic of a press slide can be changed obviously by the ellipse gears and crank gear in series.

具有变速传动特性的椭圆齿轮机构串联曲柄滑块机构能够明显改变传统压力机滑块的运动特性。

互联网摘选

15、

The Influence of Parametric Deviation of Crank Gear On Dynamic Balancing Quality or Internal Combustion Engines

曲柄连杆机构参数偏差对内燃机动力平衡性能的影响

互联网摘选

16、

On parametric feature lib of internal combustion engine crank gear

内燃机曲柄连杆机构参数化特征库研究

互联网摘选

17、

Special Milling Machine for Crank Gear of Pumping Units

抽油机曲柄齿专用铣床

互联网摘选

18、

Principle and Application of the Additional Weight Balance of Micro-amplitude Mechanism Driven by a Crank Gear

曲柄机构传动的微幅振动机械的配重平衡平衡重，配重作为一种抗衡的重量

互联网摘选

19、

On the base of exact analysis offeree for the double crank ring-plate-type cycloid drive, we building 3-D solid model and drawing the CAD paper for the double electromotor drive the double crank ring-plate-type cycloid reducer.

在双曲柄环板式针摆行星传动准确受力分析的基础上，对双电机驱动双曲柄四环板式针摆行星减速器进行三维建模并绘制CAD图纸。

互联网摘选

20、

On the basis of the discussion on the principle of double crank ring-plate-type cycloid drive, the method of force analysis is proposed, and the accurate model of force analysis established.

在论述双曲柄环板式针摆行星传动原理的基础上，提出了受力分析方法，建立了准确的力分析模型。

互联网摘选