1、

The model of reentry trajectory is established and the angle of attack is regarded as control variable.

首先建立了高超声速导弹再入段弹道模型,并将攻角作为控制变量。

互联网摘选

2、

The article analyzed the background in which financial risks in universities occur, established much angle fields of risk observation points, designed risk indexes, established effective risk early warning system to forecast the financial risks promptly and scientifically.

分析了我国高校财务风险产生的背景,提出应多角度设置风险观测点,设计风险指标,建立有效的高校财务风险预警系统,对高校财务风险进行及时、科学的预警。

互联网摘选

3、

Target vehicle models before and after optimized for dynamic simulation were established. Angle gradients of steering, roll and pitch were analyzed in vehicle stability simulations, so were the maximum lateral accelerations.

建立了目标车优化前、后的动力学整车仿真模型,分析了两者在整车性能仿真试验中的方向盘转角梯度、侧倾梯度、最大侧向加速度和制动俯仰角梯度等性能。

互联网摘选

4、

This paper introduced the machining properties of PCD tool in cutting out Al2O3 laminated flooring, and made a study on the configuration of tools, the material 0f cutting edge, the engagement angle of the tools and the machining parameters.

本文介绍了切削Al2O3强化木地极的加工特点,研究了金刚石刀具的结构、切削刃材料、几何角度及切削参数等。

互联网摘选

5、

More results were found by experiment that the entrance angle of die has different Bagley end correction and recoverable elastic strain on different experimental materials.

通过实验研究进一步发现,不同的口模入口角对实验材料表现出不同的Bagley校正因子和可回复弹性应变。

互联网摘选

6、

More Analysing and Studying the Definition of Crank Angle between Extreme Positions

对极位夹角定义的进一步分析和研究

互联网摘选

7、

Development of Crank Angle 'Window' Controller for IC Engine

内燃机曲轴转角窗口控制器的研制

互联网摘选

8、

Each quantity is considered to be a function of the crank angle and radial position in the combustion chamber.

各计算量均作为曲轴转角和燃烧室径向位置的函数;

互联网摘选

9、

The transient change of discharge coefficient via engine crank angle is calculated for the first time.

首次计算出连接通道流量系数随曲轴转角的瞬时变化规律。

互联网摘选

10、

During toothbrushing, bristles should be placed at an angle against the gum margins, gently move the toothbrush back and forth in small amplitude like massaging the gums with only the bristles moving but the toothbrush head hardly moves.

刷牙时,刷毛要斜斜的放在牙龈旁边。刷牙的动作幅度不要大,前前后后的,好像在摩擦牙齿,刷毛在摆动,但牙刷头只是少许摆动。

互联网摘选

11、

The projecting beam angle can be manually adjusted using a screwdriver, and the adjustable power setting reduces hot spots and washouts.

投影光束角度可使用螺丝刀手动调节,可调节电压的设置能降低热点和冲刷的伤害。

互联网摘选

12、

Discussion on ultrasonic testing of the pipe socket angle seam

浅谈管座角焊缝超声波探伤

互联网摘选

13、

Press Angle's Analysis of New Type of Indexing Mechanism with Arc Surface Cam

新型弧面凸轮分度机构的压力角分析

互联网摘选

14、

Introduce the principium and method of Euler angle algorithm, direction cosine algorithm, Quaternion algorithm, and Rotation Vector algorithm.

分别介绍了欧拉角法、方向余弦法、四元数法和等效旋转矢量法的解算原理和步骤。

互联网摘选

15、

The free through-feed grinding method is adopted to grind the OD of small sized non-symmetric spherical rollers on centerless CD grinder with common corundum guide wheels, i. e. grinding slopes with same angle but different length on both sides first, then going on through-feed grinding.

采用自由贯穿磨削方法,在无心外圆磨床上用普通砂质导轮磨削小型非对称球面滚子外径,即先在圆柱滚子两端磨出角度相同但长度不同的斜度,然后进行贯穿磨削。

互联网摘选

16、

Calculation of the Wrap Angle of the Corrugated Paper around The Corrugating Roll

瓦楞原纸缠绕瓦楞辊顶端包角的计算

互联网摘选

17、

Introduction: This useful toolbox contains 12 tools: Ruler, Angle Protractor, Exchange Rate, Stopwatch, Level, Plumb, Unit Converter, Light, My Position, Clothing Size, Body Mass Index, and Shoe Size.

简介:多功能工具箱包含12款工具:尺子、量角器、汇率转换、秒表、水平仪、重垂线、单位换算、灯光、我的位置、衣服尺码、健康查询以及鞋码。

互联网摘选

18、

The influence of the angle of convex corner on the effect of detonation waves

拐角角度对爆轰波拐角效应的影响

互联网摘选

19、

The result shows that the die swell ratio of two fluids changes a little, as the convergence angle ranges between 0 ° and 30 °.

结果表明:当流道收敛角α在0°~30°区间变化时,角度的大小对两种熔体的挤出胀大率均有一定的影响;

互联网摘选

20、

Increased convergence angle did not obviously increase fracture strength of the dentin-bonded IPS Empress 2 all-ceramic crown.

牙体轴壁聚合度的增大并不能显著提高采用粘结系统粘结的全瓷冠的抗压强度。

互联网摘选

  • 今日热词
  • 热门搜索

简答网英语词典(dict.jiandongshicai.cn)为您提供在线翻译、英语词典、单词大全、英译汉、汉译英等英语服务!可按单词头尾、字数和词义分类查询。支持lj:关键词格式查询例句。

用户反馈
请选择反馈类型(可多选):
您的联系方式:(如需回复请填写联系方式)
反馈内容:
提交成功 小编会尽快处理
回到顶部
点击反馈