annealing的例句大全

The line is composed of hot gas generator , melting furnace and annealing furnace in series.

研制成功一种新型烧煤的炉组,由热煤气炉 、 熔化炉和退火炉串联组成.

互联网摘选

Exact 2-D Analytical Model of Ion Implanted Dopant Redistribution During Annealing

在退火过程中离子注入杂质再分布的二维精确解析模型

互联网摘选

Chromium doped titanium dioxide Cr-TiO2 was prepared by the sol-gel method. The effects of annealing temperature on the crystal structure, oxidation states of chromium, and UV-vis absorption proper-ties of Cr-TiO2 were investigated in details.

采用溶胶-凝胶法制备了铬掺杂二氧化钛（Cr-TiO2），并对经过不同温度烧结的Cr-TiO2的结构、吸收光谱及样品中铬的氧化态等进行了表征。

互联网摘选

The Annealing Furnace is a key Equipment for any Hot Dip Galvanizing Line.

对于任何连续热镀锌线退火炉都是关键设备.

互联网摘选

To introduce the application of intelligent control in temperature control process of oil-burning annealing furnace.

简要介绍智能控制在燃油退火炉温度控制过程中的应用.

互联网摘选

Strip breakage happened very often in the annealing assembly line at the silicon steel workshop of Wuhan Iron& Steel Corp.

武钢硅钢厂退火生产线经常发生因带钢跑偏造成断带事故。

互联网摘选

Study on Strip Breakage Inside Furnace of Continuous Annealing Line of Cold Rolled Sheet

冷轧薄板连续退火线炉内断带原因分析

互联网摘选

Singly heat-providing technological transformation of dry oven and annealing furnace for steel casing

铸钢烘干炉和退火炉单一供热的技术改造

互联网摘选

Ion implantation technique for the fabrication of very high-speed bipolar circuits is discussed in the paper, with emphasis on the ion implantation doping and shallow junction formation and the annealing of the implanted layer in bipolar device process.

本文讨论了高速双极器件制造中的离子注入技术。重点讨论在双极器件制造工艺中的离子注入掺杂技术，离子注入形成浅结技术，以及离子注入层的退火技术。

互联网摘选

By controlling the cooling speed of pierced billet after hot piercing, the DP-structure F+ B could be obtained. The times of annealing the process of cold, drawing could be decreased by 50%.

控制热穿孔后荒管的冷却速度可获得F＋B的双相组织，并减少冷拔过程中50%的退火次数。

互联网摘选

Testing method for annealing point and strain point of glass by beam bending

玻璃退火点和软化点测定方法-压梁法

互联网摘选

Prolonging the holding time of the electric pulse annealing, the full wave at half maximum ( FWHM) of the halo peak for amorphous phase became narrow, indicating an enhanced short range order.

电脉冲后等温晶化过程中，延长等温时间，非晶馒头峰的半高宽（FWHM）变窄，表明BMG内短程有序程度增加。

互联网摘选

The microhardness and wearing resistance is increased with increasing annealing temperature.

随着退火温度的升高，耐磨性和显微硬度都有所提高。

互联网摘选

The volume fraction, Si content and the size of the DO_3 ordered region of α-Fe ( Si) phase increase as the annealing time increases.

随退火时间的延长，α－Fe（Si）的体积分数，Si含量及DO3有序区尺寸增加。

互联网摘选

Application of n_2 mixed with h_2 in continuous bright annealing of stainless steel

氮加氢气氛在不锈钢连续式光亮热处理中的应用

互联网摘选

Annealing: Heating to 830 ~880 Holding time 1 ~3 h, Colding in furnace.

退火: 加热至830～880℃,在此温度停留1～3小时, 在炉中冷却.

互联网摘选

Annealing: Heating to 780 ~850 Holding time 1 ~3 h, Colding in furnace.

退火: 加热至780～850℃,在此温度停留1～3小时, 在炉中冷却.

互联网摘选

Annealing: Heating to 830 ~860 Holding time 1 ~3 h, Colding in furnace.

退火: 加热至830～860℃,在此温度停留1～3小时, 在炉中冷却.

互联网摘选

Combustion Control for Annealing Furnace is direct acting the Quality of Zinc Sheet.

退火炉的燃烧控制直接决定了镀锌板质量.

互联网摘选

Bright Annealing of Copper and Brass Strip

铜及铜合金带材的光亮退火

互联网摘选