1、

Without complicated model transformation, complicated data system and complicated operation process, this technique can achieve the integrated manufacture from the design to the machine of a product part.

结果表明,该方法无需复杂的模型转换,复杂的数据系统及复杂的操作过程,即可实现设计到制造的一体化技术。

互联网摘选

2、

In substance, motion Capture technology changes the method of animation manufacture from essence and shortens the time of animation manufacture, but as its inflexibility we must edit the data when reuse it.

运动捕捉技术从本质上改变了动画制作的方法,缩短了动画制作时间,但其缺少灵活性的特点,使得在对运动数据进行重用的时候,必须对数据进行编辑。

互联网摘选

3、

This paper presented the manufacture procedure of IPM multimedia system on the basis of accumulated data on IPM in cotton field.

本文介绍利用现代多媒体技术将棉田有害生物综合治理的研究结果开发制作成一个多媒体系统的过程。

互联网摘选

4、

An intelligent printer card is designed to reduce the main CPUs working load of digital bus protection, which is based on80386EX and used to implement the tasks of printing data processing and print.

为减轻微机母线主保护CPU的工作负荷,开发一个以80386EX为核心的智能打印板完成数据处理及打印任务。

互联网摘选

5、

In this paper, we designed a physical chemistry experiment, calculated the constant-pressure heat capacity of HI with infra-red spectrum data and gave a microscopic interpretation of the relationship between heat capacity and temperature.

为加深学生对统计力学原理的理解,本文设计了一个物理化学实验,利用红外光谱数据计算碘化氢的恒压摩尔热容,并对热容与温度的关系从微观角度加以解释。

互联网摘选

6、

Data Structure Optimization and Storage Organization of the RFPA~ ( 2D) Software

RFPA~(2D)软件的数据结构优化及其存储组织

互联网摘选

7、

Immediate feedback via graphs was provided to verify proper data capture.

通过图像提供直接反馈信息以保证采集正确数据.

期刊摘选

8、

Objective To improve and enrich the ultrasonic image data of lesions about lumbar spinal canal.

目的丰富腰椎管区病变的超声诊断影像资料.

互联网摘选

9、

How and elaborated the data which obtained has utilized to the design calculation in.

并且论述了如何把所得到的数据运用到设计计算中.

互联网摘选

10、

By using conventional meteorological data and the infrared and visible images of GMS-5 satellite, the floating dust weather from April 25 to May 4 in 1999 in Tarim Basin is analyzed.

根据常规气象观测资料、GMS5静止气象卫星的红外云图和可见光图像,分析了1999年4月25至5月4日塔里木盆地浮尘天气。

互联网摘选

11、

The method by using SONN to auto-identify the seismic lithofacies from seismic data has been successfully applied in LGX oilfield of Tarim basin.

通过地震数据自动识别地震岩相,在塔里木盆地LGX油田应用取得了明显效果。

互联网摘选

12、

In MX area, Tarim basin, there are serious static mis ties between the seismic data collected in the early period of exploration and that in recent years because of the complex near surface conditions of desert.

塔里木盆地MX地区,地表为沙漠,复杂的近地表条件造成有些早期采集的老测线和新测线之间存在着严重的静校正闭合差。

互联网摘选

13、

Based on thermal simulation data of gold tube experiment in the closed system and combined with the specfic Kinetics Software, the parameters of hydrocarbon generation kinetics from Mesozoic source rocks in the Kuqa Depression, Tarim Basin were studied.

根据封闭体系黄金管热模拟实验结果,应用Kinetics专用软件,研究了塔里木盆地库车坳陷中生界不同类型烃源岩的生烃特征与动力学参数。

互联网摘选

14、

It was shown that Compared with finite element method, boundary element method is more accurate, needs less cpu time and data preparation, especially with isoparametric quadratic element.

结果表明,边界元法分析活塞温度场,不仅计算准备工作量比有限元大为减少,而且精度高、计算时间短,尤其采用二次等参元后,其优点更加突出。

互联网摘选

15、

In order to evaluate precisely the surfaces formed from different machining methods, computers and admeasuring apparatus were used to collect the data of surface outlines and quantitatively calculate and analyze the outline expansion length ratio.

为了对不同机械加工方法形成的表面进行准确的评价,通过计算机和测量仪采集表面轮廓数据,对轮廓展开长度比进行了定量的计算与分析。

互联网摘选

16、

Development of aerosol retrieval algorithm over global ocean using FY-1C/ 1D data

FY-1C/1D全球海上气溶胶业务反演算法研究

互联网摘选

17、

The result shows that the system designed can realize QR code identification, the data transmission and all the software functions perform well.

本文在完成全部设计的基础上进行了调试和功能测试,结果表明所设计的系统能够实现QR码的识别和数据传输,软件界面的各项功能均表现良好,达到了预期的设计效果。

互联网摘选

18、

Reasoning Ability: to define problems, collect data, establish facts, and draw valid conclusions.

能够发现并定义问题, 收集数据, 确定实情, 并作出有效的结论.

互联网摘选

19、

That includes the first element as a data item and the second element as a pointer to the next node .

其中第一个元素为数据条目,第二个元素为指向下一个节点的指针。

互联网摘选

20、

Results of processing the 2D physical model data by DMO and PSI methods

用DMO和PSI方法处理二维物理模型数据的结果

互联网摘选

  • 今日热词
  • 热门搜索

简答网英语词典(dict.jiandongshicai.cn)为您提供在线翻译、英语词典、单词大全、英译汉、汉译英等英语服务!可按单词头尾、字数和词义分类查询。支持lj:关键词格式查询例句。

用户反馈
请选择反馈类型(可多选):
您的联系方式:(如需回复请填写联系方式)
反馈内容:
提交成功 小编会尽快处理
回到顶部
点击反馈