1、

Design formula for average crushing force of round tube is developed. Also the effect of reinforcing the tube by mean of honeycomb filling on crashworthiness strength is accessed.

给出了平均碰撞力的设计公式,最后探讨了采用铝基蜂窝状填充材料对圆管耐撞强度的影响。

互联网摘选

2、

When massive stars exhaust their nuclear fuel and can no longer resist the relentless, crushing force of gravity, they collapse violently.

当耗尽核燃料的时候,大型恒星再也抵挡不住核心引力造成的残酷的粉碎性重压,它们发生剧烈塌缩。

互联网摘选

3、

It comes up with crushing force and must be overcome if a certain level of awareness is to be achieved.

它带着压倒性的力量出现,如果要获得某一层面的知觉,就必须加以克服。

互联网摘选

4、

The results indicated that the crushing force decreased and there was not notable effect on deformation with increasing moisture content.

结果表明,破壳力随着含水率的增加而降低,壳体变形没有显著变化;

互联网摘选

5、

The crushing force of material in different motion parameter is simulated and analyzed. 7.

对物料在不同运动参数下的破碎力进行仿真及分析。

互联网摘选

6、

Crushing force is one of the important basic parameters in jaw crusher.

破碎力是破碎机重要的基本参数之一。

互联网摘选

7、

The reservoir banks are always changed by the natural force.

库岸在自然营力作用下总是在不断改变着的。

互联网摘选

8、

The partial force analysis of gate pier hollow and shallow capping beam

门式桥墩空心薄壁盖梁局部受力分析

互联网摘选

9、

So, remember when we talk about Coulomb force, what's holding the nucleus and the electron together, there's2 things we need to think about.

还记得我们在讨论库仑力的时候,提到是什么将原子核与电子束缚在一起时,有两点需要考虑。

互联网摘选

10、

We know what an electric field is, it's just a space through which a Coulomb force operates.

我们知道,电场不过,是库仑力的作用空间。

互联网摘选

11、

The influence of engine speeds and valve gaps on the valve seating force has been examined.

讨论了转速与气门间隙对落座力的影响。

互联网摘选

12、

Under the valve spring preload and seating impact force, the deformation at the site of contact accumulated more and more big, eventually leading to the valve seat fatigue failure.

气门座圈在预紧力和落座冲击力的共同作用下,在接触部位变形累计越来越大,最终导致气门座疲劳破坏。

互联网摘选

13、

The seating performance evaluating indicators were proposed. The control of valve seating velocity and holding force was investigated.

提出了气门落座特性的评价指标,研究了气门落座速度和落座保持的控制方法。

互联网摘选

14、

Methods: Self matched pairing method and random control trials were employed in 50 patients. Using EMLA to smear on the trial tooth, after 5 minutes to measure the electral vital force and record the VAS score in the process of treatment.

方法:50例患者采用自身牙齿配对随机对照分组,实验牙齿用EMLA涂抹牙齿及牙周粘膜后5min测量牙齿电活力,用VAS法评价磨切牙齿时疼痛情况。

互联网摘选

15、

It is found that, on repeated impact force, the various of failure mode of the components include the surface crackle, surface plastic deformation, corrosive pitting and coat collapse, etc.

发现在反复多次冲击碰撞力作用下,覆层零件表现出表面裂纹、表面塑性变形、表面点蚀和覆层崩落等多种失效形式。

互联网摘选

16、

Thirdly, the impact of the cornering force of each wheel on direction instability due to load transfer combined with characteristics of tires is also studied.

及通过载荷转移结合轮胎特性所导致的各个车轮上的侧偏力大小对汽车行驶方向失稳影响的研究;

互联网摘选

17、

Finally, according to tire models, Magic Formula is applied to establish the correlation between the lateral angle and the cornering force as well as a handling dynamics model.

根据轮胎模型应用魔术公式建立侧偏角与侧偏力的对应关系并建立爆胎汽车的操纵动力学模型。

互联网摘选

18、

Different models' responses to various steering conditions, including velocity, front-wheel corner and friction coefficient of road surface, are analyzed, which explain that the tire nonlinearity between slip angle and cornering force have effects on the simulation results.

针对不同的使用参数,包括车速、前轮转角和路面摩擦系数,对不同模型的仿真结果进行比较分析,说明了轮胎的侧偏角和侧偏力之间存在的非线性关系对仿真结果的影响。

互联网摘选

19、

The Coulomb force acting on the free line charge due to the piezoelectricity and the distributed boundary polarization charges was discussed at first.

首先分析的是因压电性和边界极化电荷所引起的作用在自由电荷上的Coulomb力。

互联网摘选

20、

The optimization preform shape checked by forward operation and the results show that the variation of effective strain trend to uniform, the forming force and the effective stress are decreased. 4 、 The study of multilayer metal die.

通过对优化结果进行检验,可以看出优化后的模型变形更加均匀,使得终锻模的等效应力和成形所需的动力均有所减小。4、多层金属热锻模的研究。

互联网摘选

  • 今日热词
  • 热门搜索

简答网英语词典(dict.jiandongshicai.cn)为您提供在线翻译、英语词典、单词大全、英译汉、汉译英等英语服务!可按单词头尾、字数和词义分类查询。支持lj:关键词格式查询例句。

用户反馈
请选择反馈类型(可多选):
您的联系方式:(如需回复请填写联系方式)
反馈内容:
提交成功 小编会尽快处理
回到顶部
点击反馈