heat-affected的例句大全

Generally, intensity of welds in FSW exceeds heat affected zone.

通常情况下, 摩擦搅拌焊的焊缝强度超过热影响区.

互联网摘选

Weld, heat-affected zone and substrate metal test etc.

焊缝中心区, 热影响区,基体组织检验等.

互联网摘选

The welding methods, heat-affected zone, and design method of weld strength are introduced.

文中介绍铝合金的焊接方法 、 接热影响区以及焊接强度的设计方法.

互联网摘选

The influence of weld heating on microstructure of heat affected zone was investigated in this paper.

探讨了焊接加热对热影响区组织的影响.

互联网摘选

Weld hardness is controlled ( including the heat-affected zone ) and maintained below 200 HB.

焊接硬度控制在 ( 包括热影响区域 ) 200HB以下.

互联网摘选

Fracture toughness of heat-affected zone ( HAZ ) was between the base metal and weld metal.

焊接热影响区的断裂韧性介于母材和焊缝金属之间.

互联网摘选

Results showed that hardness is a little different in the heat affected zone ( HAZ ).

结果表明,焊接热影响区具有较小的 硬度 差异.

互联网摘选

This paper analyzed the solenoid properties, which affected the property of high power giant magnetostrictive actuator and designed some heat dissipate schemes for the driving solenoid, which was the major heat resource of the actuator.

针对影响低频大功率超磁致伸缩（GMM）换能器性能的励磁线圈进行设计分析，对作为换能器主要热源的激励线圈设计了几种散热方案。

互联网摘选

The elements which affected the ablative properties of silicone rubber heat shields were discussed.

探讨了影响硅橡胶热防护材料烧蚀性能的因素.

互联网摘选

In addition, cut hardness decreases, heat affected zone width reduces and the size of grain gets smaller during underwater cutting.

超声频脉冲的作用还使得水中切割时切口硬度降低，热影响区宽度降低、晶粒变细小。

互联网摘选

Therefore, it is necessary to reasonably decreasing the cool rate after welding process for improving the ability of anti-fatigue crack initiation in the weld heat affected zone. 5.

因此在焊接时适当地降低热影响区的冷却速度，可以使焊接热影响区获得更优的抗疲劳裂纹萌生能力。

互联网摘选

The basic requirement of welding the steel 2205 is that the weld metal and heat-affected zone obtain a favorable phase balance and retain the performance as the base metal after welding.

平衡铁素体和奥氏体两相组织在焊缝金属和热影响区中的比例，保证焊接接头的性能，是双相不锈钢焊接的基本要求。

互联网摘选

Firstly, the paper established the finite element model of different thickness TWB and divided the geometric model into non-uniform finite element mesh combining the structural characteristics of TWB. the plasma arc heating zone and heat-affected zone were also considered.

首先结合拼焊板的结构特点以及等离子体弧加热区与热影响区尺寸，建立差厚拼焊板的有限元模型并划分不均匀的有限元网格。

互联网摘选

The welded seam of the TWB jointed by LBW contained large quantity tiny equiaxial crystal and the heat-affected-zone ( HAZ) was not obvious, the columnar crystals and cellular dendrite near the bond line were grown in the orientation of radiation.

激光拼焊板焊缝中心为大量细小的等轴晶；热影响区不明显，在熔合线附近存在少量沿散热方向生长的柱状晶和胞状树枝晶。

互联网摘选

It is shown that the viscous shear-heating of PFB provides a thermal energy source for positive temperature-anomalies and results in the enlargement of PFB-affected width by heat conduction.

研究表明，塑性流动网带黏性剪切热的产生为温度的正异常提供了热源，并通过热传导扩展网带的影响范围，形成相应的热异常网带。

互联网摘选