1、

Compared to tradition heat regenesis, microwave regenesis had the characters of high regenesis adsorption efficiency, quickly decalescence and short regenesis cycle.

结果表明,微波辐射再生比传统加热再生吸附效率高,且具有再生过程吸热快,再生周期短的特点。

互联网摘选

2、

Structure Design and Heat Transfer Analysis for the Cryostat

低温杜瓦装置的结构设计与传热分析

互联网摘选

3、

The Energy Saving Reform of the Muffle Furnace for Use in Heat Treatment

热处理马沸炉的节能改造

互联网摘选

4、

The Level-Set approach was adopted to deal with some factors such as deposited track, liquid/ vapor interface, which considered surface tension gradient ( the major driving forces for the melt flow), interface curvatures, buoyancy and convection heat loss.

通过水平集(level set)方法处理熔积轨迹、液/气界面等因素,考虑了熔体流动的主要驱动力表面张力梯度、表面曲率以及浮力等。

互联网摘选

5、

Studies on the Heat Treatment and Realization of the Dence-Ring of Conjugated Bond Polymer of Main Chain

共轭键主链的聚合物热处理稠环化的研究

互联网摘选

6、

The reason for heat of traditional line clamp was analyzed. The advantages, construction technology and its test and application conditions for a kind of new wire connector, H type line clamp, were introduced.

分析了传统线夹发热的原因,介绍了一种新型线夹&H型线夹的优点、施工工艺及其试验和应用情况。

互联网摘选

7、

The effect of the amount of water needed under the cement's normal consistency, setting time and volume stability were investigated when heat insulation and waterproofing powder was added in cement.

研究了当水泥中混入隔热防水粉后,隔热防水粉对水泥标准稠度用水量、凝结时间及体积安定性的影响。

互联网摘选

8、

Simulating Saturated Soil Consolidation with Heat Field Analysis by Finite Element Method

模拟饱和土固结的有限元热力场分析

互联网摘选

9、

This paper mainly presents that constructional mid-carbon alloy steel, after bulk moulding deformation, heat treatment and cold surface deformation can raise fatigue strength of materials effectively.

本文主要介绍中碳合金结构钢经整体塑性变形、热处理后再进行表面冷变形工艺是提高材料疲劳强度的有效途径。

互联网摘选

10、

An Analysis of Vapor Flow From the Free Molecular to Continuum Flow in the High Temperature Heat Pipe

高温热管内蒸汽从分子流动到连续流动过程分析

互联网摘选

11、

This paper introduces the features of the concrete, analyzes the types of concrete cracks, and sums up the causes of and control measures for the concrete cracks from the aspects of contraction crack, temperature crack and hydration heat crack.

介绍了混凝土的特性,分析了混凝土裂缝的种类,分别从收缩裂缝、温度裂缝、水化热裂缝等方面总结了混凝土裂缝产生的原因及其控制措施。

互联网摘选

12、

Influences of different magnetically induced longitudinal vortices on air convection heat transfer

不同磁致纵向涡形式对空气对流换热的影响

互联网摘选

13、

Numerical Simulation of Heat and Water Transfer in Unsaturated Soil With Air Convection

大气对流对土壤内热和水分迁移影响的数值模拟

互联网摘选

14、

Analyzing Waste Heat Utilization of Flue Gas in Convection Section of Primary Reformer

一段转化炉对流段烟气余热利用分析

互联网摘选

15、

Free convection heat transfer from upward-facing small horizontal surfaces

热面向上水平小尺寸平板的自然对流换热研究

互联网摘选

16、

A study on the free convection condensation heat transfer of binary mixture

双组分混合物自然对流冷凝传热的研究

互联网摘选

17、

Experimental study on heat transfer of natural convective flow between micro-wire and air

微细金属丝在空气中的自然对流换热的实验研究

互联网摘选

18、

Another is that the unit comprehensive energy consumption is decreased by 17.9%, by means of optimizing the steam use system and combining heat and electricity.

方案二根据工艺过程要求优化蒸汽利用系统,进行热电联产,合成氨综合能耗降低17.9%。

互联网摘选

19、

Results show that in the frame work of moist isentropic coordinate, vorticity development can result from reduction of convective stability, or convergence. or latent heat release in isentropic surfaces.

结果表明,在湿等熵坐标中,涡旋的发展与对流稳定度的减少,等熵面上的辐合和潜热的释放有关。

互联网摘选

20、

The major causes of low heat efficiency for the high-pressure once-through boiler include high tail smoke temperature, fouling of finned tube of convection bank of tubes and high excess air coefficient.

锅炉尾部排烟温度高、对流管束翅片积灰和过量空气系数偏大是导致高压直流锅炉热效率低的主要原因。

互联网摘选

  • 今日热词
  • 热门搜索

简答网英语词典(dict.jiandongshicai.cn)为您提供在线翻译英语词典单词大全英译汉汉译英等英语服务!可按单词字数词义分类查询。支持lj:关键词格式查询例句。

用户反馈
请选择反馈类型(可多选):
您的联系方式:(如需回复请填写联系方式)
反馈内容:
提交成功 小编会尽快处理
回到顶部
点击反馈