1、

Self-priming centrifugal pump over-current components are: inhalation room, impeller, the chamber pressure is in three parts.

自吸离心泵的过 流部件 有: 吸入室, 叶轮, 压出室三个部分.

互联网摘选

2、

Using windmill electricity generation principle, regards as the impeller wheel, using wheel's rotation electricity generation.

利用风车发电原理, 把车轮看做叶轮, 利用车轮的转动发电.

互联网摘选

3、

The Design of Centrifugal Compressor 3-D Impeller Based on CFX Software

基于CFX软件设计离心压缩机三元叶轮

互联网摘选

4、

After investigating the concave exit edge of slurry pump impeller, the paper points out the possibility to improve the flow passage wear of slurry pumps in the hydrodynamics point of view.

通过对渣浆泵转轮的凹形叶片出口边的研究,从流体动力学的角度指出了改善渣浆泵过流部件磨损情况的可能性;

互联网摘选

5、

Under the environment of Visual C++ 6.0, the parametric 3-D modeling software PCAD-3D is developed, which includes column blade, curved blade, double channel impeller, volute and radial vaned diffuser, etc.

在Visual c++6.0编程环境下,开发了扭曲叶片、圆柱叶片、双流道叶轮、蜗壳和径向导叶等的参数化三维造型软件PCAD-3D。

互联网摘选

6、

In the whole flow range, the impeller operates under subsonic condition and the radial diffuser operates under transonic condition, thus the choked mass flow rate is determined by the throat area of the radial diffuser.

整个特性线范围内离心叶轮基本在亚音速情况下工作,而径向扩压器是在跨音速条件下工作,离心压气机整机的最大流量是由径向扩压器的喉部面积决定的;

互联网摘选

7、

Reverse design and process simulation of dredging pump impeller

疏浚泥泵叶轮的反求设计及加工仿真

互联网摘选

8、

A particular sludge agitator for oval sludge digester has been designed and made up on the basis of the theory of axis pump impeller and inducting principle against the cavitations erosion of pump.

根据轴流泵叶轮和水泵提高抗汽蚀性能的诱导轮等设计方法,设计出了新型卵形污泥消化池搅拌机。

互联网摘选

9、

Dredging Pump flow pump components mainly composed by Shell, impeller, the former liner and after liner.

挖泥船泥泵过流部件主要由泵壳 、 叶轮 、 前衬板和后衬板等组成.

互联网摘选

10、

Product direction: valve parts, marine castings, impeller blades, mines wear-resistant parts , steel castings, and so on.

产品方向: 阀门零部件 、 船用铸件 、 叶轮叶片 、 矿山 耐磨件 、 不锈钢铸件等.

互联网摘选

11、

The experiments of an oil film visualization technique are accomplished on the surfaces of impeller, inlet segment and partial meet face between inlet segment and volute casing.

对螺旋离心泵叶轮、进水节和进水节与蜗壳交界处的部分端面做了表面油膜、油点试验。

互联网摘选

12、

Flow field of centrifugal pump ( Pump flow passage includes suction pipe, impeller and volute casing.) was obtained by solving the Reynolds average Navier-Stokes equation.

通过求解包括进水管、叶轮、泵体等过流部件在内的水泵流道内的三维稳定雷诺平均Navier-Stokes方程,获得水泵内部的流场分布特征。

互联网摘选

13、

Various common troubles of rotor, bearing, impeller, mainshaft and non-rotatable parts of centrifugal gas blast blower were analyzed systematically.

系统地分析了离心式煤气鼓风机转子、轴承、叶轮、主轴、非转动部件等各种常见故障。

互联网摘选

14、

Security inspection and fracture failure analysis of blast blower impeller

鼓风机叶轮快速断裂的检测及失效分析

互联网摘选

15、

The suction plate shall contain a replaceable 400 Series stainless steel wear ring to match the impeller wear ring.

负压力板应该包含一个能够与叶轮抗磨环匹配的可替换400系列不锈钢抗磨环。

互联网摘选

16、

The axial force of pump is balanced by balancing ring on impeller.

泵的轴向力由叶轮设平衡环来进行平衡。

互联网摘选

17、

Application of Facing Sand within Graphite on Bronze Impeller Casting

含石墨面砂在青铜叶轮铸件生产中的应用

互联网摘选

18、

The composing, function, selecting principle and key of parts of the pump, such as electromotor, axle-jointer, bearing box seat, water cooling seal cavity, down pump body, pump axle and impeller, are introduced in detail by pump body structure diagram.

给出泵体结构图,详细介绍泵的电机、联轴器、轴承箱座、水冷密封腔、下泵体、泵轴、叶轮等部件的组成、功能,各部件的选型原则和关键点。

互联网摘选

19、

On the basis of historical records of maintenance and operation, abnormal vibration of DH air compressor was analyzed using frequency spectrum analysis method. It was found that the rust was washed off from interstage cooler into the flow passage of impeller to cause imbalance.

结合历次检修及运行记录,利用频谱分析方法对DH型空气压缩机的异常振动进行分析,判定出产生振动异常的原因为级间冷却器的锈蚀物冲刷至叶轮流道上造成不平衡。

互联网摘选

20、

It discusses the effects of using impeller sealing ring to regulate axial force of turbo pump.

从分析某汽轮给水泵机组轴承磨损故障入手,阐述了利用叶轮密封环调节汽轮给水泵的轴向力的作用和效果.

互联网摘选

  • 今日热词
  • 热门搜索

简答网英语词典(dict.jiandongshicai.cn)为您提供在线翻译英语词典单词大全英译汉汉译英等英语服务!可按单词字数词义分类查询。支持lj:关键词格式查询例句。

用户反馈
请选择反馈类型(可多选):
您的联系方式:(如需回复请填写联系方式)
反馈内容:
提交成功 小编会尽快处理
回到顶部
点击反馈