1、

Conclusions: Each method a useful tooldifferent measuring scale and different studying purpose.

结论: 不同根管弯曲度测量法的研究侧重点与观察尺度不尽相同,因而其适用范围也是不同的.

互联网摘选

2、

Two series of fatigue crack growth rate ( FCGR) tests using three point bend specimen with different integral knife edge designs are performed. Effect of elastic modulus on the measurement of fatigue crack length using compliance technique is analyzed.

用不同整体刀口设计的三点弯曲SE(B)试样做了两组疲劳裂纹扩展速率(FCGR)试验,分析了弹性模量在柔度法测量疲劳裂纹长度中的影响。

互联网摘选

3、

The mechanical analysis on axial bending of pump barrel

有杆泵泵筒的纵向弯曲机理分析

互联网摘选

4、

Branches may be made straight, but not an old tree.

嫩枝易矫直, 老树难弯曲.

互联网摘选

5、

The parameters reflecting normal stiffness have more obvious effects on extensional vibration mode than those on flexural mode and torsion mode.

结合面法向刚度大小的参数对纵向振动模态的影响比对弯曲、扭振模态的影响显著;

互联网摘选

6、

The computation shows that parameters reflecting the tangential stiffness have more significant effects on torsion mode of structure than those on extensional vibration mode and flexural mode.

结果表明,描述结合面切向刚度大小的参数对结构的扭振刚度模态的影响比对纵向振动模态和弯曲模态的影响显著;

互联网摘选

7、

The tensile strength and the bending modulus of RHDPE/ EVA/ MWRP blend increased by 35% and 25% respectively when the waste rubber powder was modified by self-made surface modifier ACDI.

废胶粉经自制表面改性剂ACDI预处理后,其相应的RHDPE/EVA/MWRP体系的拉伸强度和弯曲模量分别增加35%和25%,而对共混物的其它性能影响不大。

互联网摘选

8、

In this paper, we established a wormlike chain ( WLC) model with variable local persistence length to study polymer molecules with different bending stiffness at each point.

本文针对链上各点处弯曲刚度不同的聚合物分子,建立了变持续长度蠕虫链(WLC)模型。

互联网摘选

9、

Based on numerical and experimental results, for separation channels with a width of 80/ ttn, 31% is the optimal constriction ratio to reduce band broadening by introducing narrowed turns.

综合数值计算和实验结果,对于宽度为80μm的分离微通道,采用收缩弯曲微通道降低样品区带增宽时的最优收缩比为31%。

互联网摘选

10、

Mature bud (4-)6-7 cm. Corolla red, tube slightly curved, inflated, lobes lanceolate, ca. 20 mm, reflexed.

成熟芽(4-)6-7厘米。花冠红色,筒部稍弯曲,膨大,裂片披针形,约20毫米,反折。

互联网摘选

11、

Keep left leg bent with heel planted. Put your weight on that leg.

保持左腿弯曲、踮起脚来.把你身体的重量放在左腿上.

互联网摘选

12、

Current KWS provides a flexion-extension movement with one fixed rotation center, which is partially incomparable to biomechanical contours.

本模拟膝关节磨耗机提供一固定旋转中心之弯曲-伸展运动,但部分仍与人体膝关节之生物力学不相合。

互联网摘选

13、

In this article, the KNG-k-ε turbulent model is used which can make good result on transient flow and bend flow.

RNG模型相比于标准k-ε模型对瞬变流和流线弯曲的影响能作出更好的反应。

互联网摘选

14、

However, many pipe bends are still made in this fashion.

然而, 许多管弯曲仍然是这种方式.

互联网摘选

15、

The trichogynes show zygotropic curvatures.

受精系显示出趋接合子的弯曲.

词典精选例句

16、

Mathematical model research on U shape parts for plate bend

钣料弯曲U形件的数学模型研究

互联网摘选

17、

Methods: Twenty humans , 20~50 years old, were analyzed by the cantilever bending experiment to lower jaw.

方法通过20~50岁正常人尸体20个下颌骨悬臂梁弯曲实验来实现.

互联网摘选

18、

There was a buckle in the metal saw.

钢锯有点弯曲.

互联网摘选

19、

A primary explanation was given to the bending-rotation fatigue ( BRF) experimental results.

讨论了TiC夹杂对试样横截面应力分布的影响,并对旋转弯曲疲劳(BRF)试验的结果给出了初步解释。

互联网摘选

20、

Bending the company specializes in wood furniture, furniture components and supporting the production.

公司专业从事弯曲木家具 、 家具部件的生产和配套.

互联网摘选

  • 今日热词
  • 热门搜索

简答网英语词典(dict.jiandongshicai.cn)为您提供在线翻译英语词典单词大全英译汉汉译英等英语服务!可按单词字数词义分类查询。支持lj:关键词格式查询例句。

用户反馈
请选择反馈类型(可多选):
您的联系方式:(如需回复请填写联系方式)
反馈内容:
提交成功 小编会尽快处理
回到顶部
点击反馈