1、

The TG-DTA , IR, XRD, TEM and BET Methods : Were used to characterize structure and morphology of nanocrystalline ZnO.

以TG -DTA 、 IR 、 XRD 、 TEM和BET等测试方法研究了纳米ZnO粉体的结构和形貌特性.

互联网摘选

2、

The crystallization in ultrathin polymer films depends strongly on film thickness ( D), particularly those with D < 20 nm exhibit a great deviation from bulk crystallization both in crystalline morphology and crystallization kinetics.

聚合物超薄膜结晶与膜厚(D)有很强的相关性,尤其是D<20nm的薄膜在结晶形貌和结晶动力学方面与本体结晶差别很大。

互联网摘选

3、

The TG-DTA , IR, XRD, TEM and BET Methods : Were used to characterize structure and morphology of nanocrystalline ZnO.

以TG -DTA 、 IR 、 XRD 、 TEM和BET等测试方法研究了纳米ZnO粉体的结构和形貌特性.

互联网摘选

4、

Surface characterization and microstructure studies are performed on chemical vapor deposited ( CVD ) tungsten coating.

研究CVD钨涂层的表面形貌和结构、断面性能、涂层的抗热震性能及高温扩散性能.

互联网摘选

5、

The wear resistance of D8 、 D9 were compared with 45 steel's. The wear mechanism was analyzed by observing the wear morphology with SEM.

分析比较了45钢与D8、D9两种耐磨堆焊材料的磨损性能,并利用SEM对这几种材料在混凝土工况条件下的磨损表面形貌进行了现察,分析了它们的磨损机理。

互联网摘选

6、

Precipitation of oxygen and carbon in buk dislocation-free CZ Si annealed at450 ℃, 700 ℃ and 1050 ℃ has been studied using infrared absorption, X-ray topography, X-ray anomalous transmission, AES and HVTEM.

利用红外吸收、x射线形貌照相、x射线反常透射、俄歇电子能谱和高压透射电子显微镜研究了在450℃、700℃和1050℃热处理后无位错CZ-Si单晶中的氧、碳沉淀。

互联网摘选

7、

From the present point of view the ballas morphologies can be described by various microstructures.

按照目前的观点,半刚石的形貌可通过多种显微结构加以描述。

互联网摘选

8、

TEM morphology of the twin specimens at stress plateau stage and martensite section at hardening stage has been observed.

观察到高应变率时应力平台与硬化阶段的TEM组织形貌分别为孪晶与断续的马氏体。

互联网摘选

9、

A systematic study is conducted on the shape and forming cause of abnormal struture about forging blank for auto gear after normalize, on the basis of analyses about primary metallographic structure of forging blank for auto gears.

在分析汽车齿轮锻坯原始金相组织和成因的基础上,比较系统地研究了汽车齿轮锻坯正火后异常组织的形貌和成因。

互联网摘选

10、

Kong Dong sea for the death Maronite Shou Shen Qi, the plastic engraved on a five-party Jungmun morphology, and Yulong coiled.

崆峒海上不死龙族的护守神器,其上刻塑有五方天帝形貌,并有玉龙盘绕。

互联网摘选

11、

The compose and microstructure of intermetallic compound after temperature cycling test are also observed by scanning electron microscope ( SEM).

通过扫描电镜(SEM)对温度循环试验后焊球金属间化合物(IMC)层和剪切强度试验后的断裂面进行了形貌、结构和组分的观察及分析。

互联网摘选

12、

Effects of AFM on pathogenesis investigation of A � � and A � � oligomer study were outlined.

应用原子力显微镜(AFM)观察Aβ42寡聚体的聚集状态、PC12细胞表面形貌变化.

互联网摘选

13、

The effect of bismuth sulfate content in plating bath and current density on current efficiency, bismuth content and morphology of obtained tin-bismuth alloy was studied.

研究了镀液中硫酸铋含量和电流密度对镀层铋含量、电流效率及镀层表面形貌的影响。

互联网摘选

14、

Low temperature fracture path and fracto-graphy of a high nitrogen bearing austenitic steel

高氮奥氏体钢低温断裂途径与断口形貌

互联网摘选

15、

The effects of complex catalysts system on morphology electro-optical properties of PDLC films were investigated.

研究了复合催化剂体系对PDLC膜的微观形貌、电光性能等方面的影响,以及催化剂的含量对所制备的PDLC膜的显示性能的影响.

互联网摘选

16、

In this study, aluminum powder was added into the aluminum oxide and boron oxide reactants as an additive in order to control the morphology of the final products.

本研究通过在氧化铝和氧化硼反应物中添加铝粉来控制最终产物的形貌。

互联网摘选

17、

This method for bismuth sulfide can make accurate controllability on shape and size feasible.

这种方法在对硫化铋的形貌尺寸有着精确可控的特点。

互联网摘选

18、

Oxygen ECR/ RP plasma etches diamond successfully with an etch rate up to 8 μ m/ h. The etch rate and surface morphology are influenced by biasing frequency and self biasing voltage.

在射频偏压辅助下,氧等离子体成功地对金刚石膜进行了刻蚀,刻蚀速率最高可达8μm/h,偏压频率和直流自偏压大小均会影响刻蚀速率和刻蚀表面形貌。

互联网摘选

19、

Influence of Morphology of Fluorocarbon Coatings with PTFE on the Settlement of Benthic Diatom

含PTFE氟碳涂层表面形貌对底栖硅藻附着的影响

互联网摘选

20、

Theoretical Study of Molecular Faces of Several Pentabasic Cyclic Compounds and the Dimer System

几个五元环化合物和二聚体体系的分子形貌的理论研究

互联网摘选

  • 今日热词
  • 热门搜索

简答网英语词典(dict.jiandongshicai.cn)为您提供在线翻译英语词典单词大全英译汉汉译英等英语服务!可按单词字数词义分类查询。支持lj:关键词格式查询例句。

用户反馈
请选择反馈类型(可多选):
您的联系方式:(如需回复请填写联系方式)
反馈内容:
提交成功 小编会尽快处理
回到顶部
点击反馈