1、

A New High Voltage Dropout Fuse with Current Limiting Characteristics

一种具有限流特性的新型跌落式高压熔断器

互联网摘选

2、

The curve of heat release rate and mass loss rate had the same shape which showed that irradiation cross-linking had the effect in the condense phase. The char formed after cone calorimetric test had the wrinkle structure to wrap the melt drops.

锥形量热仪测试的热释放速率和质量损失速率曲线轮廓类似,也说明了辐照交联在凝聚相起到的作用;燃烧后炭层呈褶皱状结构,有利于对熔滴的包覆。

互联网摘选

3、

The extraction separation experiment and differential scanning calorimetric measurement indicate that the resultant belongs to crystallizable isotactic polymer, possessing isotactic index ranging from 45% to 90%, melting point 215 ℃ and Vicat softening point 193 ℃.

抽提分离和差示扫描量热法测试表明,其为结晶型全同立构聚合物,全同立构含量为45%~90%,熔点为215℃,维卡软化点为193℃。

互联网摘选

4、

The closely spatial relationship between metasediments, migmatites and migmatitic granite-gneiss in the district exhibits the entire process of transformation from sediments to granitic rocks by metamorphic differentiation, migmatization and partial melting.

变沉积岩、混合岩及混合花岗片麻岩在空间上的密切共生关系,揭示了沉积物经历了变质分异、混合岩化和部分熔融作用改造成花岗质岩石的过程。

互联网摘选

5、

The line is composed of hot gas generator , melting furnace and annealing furnace in series.

研制成功一种新型烧煤的炉组,由热煤气炉 、 熔化炉和退火炉串联组成.

互联网摘选

6、

Wireless hot-melt Adhesive binding and hot set belongs to the contra te line.

无线胶粘装订和热熔线烫订属于端面粘结.

互联网摘选

7、

The medium-frequency induction furnace melting process of the synthetic as-cast ferrite nodular cast iron was described.

概述用中频感应电炉熔炼合成铸态铁素体球铁的生产工艺.

互联网摘选

8、

In order to solve the problems of refractory metal oxide and carbide inhomogeneous distribute in C/ C composites. In this paper, three kinds of zirconium doped C/ C composites were prepared by different materials and processes.

为解决难熔金属氧化物、碳化物在C/C复合材料中的分布的问题,本文以不同原料和工艺制备出3种锆掺杂C/C复合材料。

互联网摘选

9、

Oxidation Resistance of Chromium Carbide Coating by Molten Slag Method

熔渣法碳化铬涂层的抗氧化性能研究

互联网摘选

10、

Performance Investigation of Biomass Gasification-Molten Carbonate Fuel Cell Combined Cycle Power Generation System

生物质气化–熔融碳酸盐燃料电池联合循环发电系统性能研究

互联网摘选

11、

The sprue sections influence the technological yield of small castings in investment casting.

对于小型熔模铸件,直浇道的截面形状将影响其工艺出品率。

互联网摘选

12、

Numerical Simulation of Mold Filling and Solidification and Experimental Analysis in Furnace Grate Investment Castings

炉排片熔模铸造充型与凝固过程的数值模拟及验证

互联网摘选

13、

The team have to seek the rare opportunity to see into its molten heart.

队伍不得不寻求难得的机会以看到其熔融的心。

互联网摘选

14、

Techniques of Applying Three-Coat Melting Epoxy Powder to Steel Pipe Piles

钢管桩三层熔结环氧粉末涂敷技术

互联网摘选

15、

Aluminium electrodeposition from the organic electrolytic systems of ether solvents, aromatic hydrocarbons and dimethylsulfone have been mainly introduced.

着重介绍了在有机醚溶剂、芳香族碳氢化合物、乙基磺酸脂等有机熔盐中铝的电沉积情况;

互联网摘选

16、

Strength checking calculation of partial penetrated butt weld in the box component

箱形钢构件半熔透对接焊缝的强度验算

互联网摘选

17、

The results showed that the calculated depth of base, top width and spiral angle of flight at the start and end of the melting zone for extruder screw were in or close to the ranges recommended in literatures

结果表明,计算所得熔融段起、末端的螺槽深度、螺纹顶宽度和螺纹升角均位于或接近文献中所建议的最佳取值范围

互联网摘选

18、

Expose cylinders to corrosive materials such as ice melting compounds.

把钢瓶暴露于腐蚀性材料,如冰熔化的化合物.

互联网摘选

19、

AIF _ 3— Al _ 2 O _ 3 ( sat. ) melts at 1000℃ by a steady state potentiostatic method.

用稳态恒电位法及脉冲技术,对1000℃下2.7NaF·AlF_3-Al_2O_3 ( 饱和 ) 熔体中SnO_ 2基情性阳极上氧析出的超电压作了测定.

互联网摘选

20、

Fig. 5 The effect of heat input on the average grain size of α-Mg in FZ.

图5线能量与熔合区中平均晶粒尺寸的关系.

互联网摘选

  • 今日热词
  • 热门搜索

简答网英语词典(dict.jiandongshicai.cn)为您提供在线翻译英语词典单词大全英译汉汉译英等英语服务!可按单词字数词义分类查询。支持lj:关键词格式查询例句。

用户反馈
请选择反馈类型(可多选):
您的联系方式:(如需回复请填写联系方式)
反馈内容:
提交成功 小编会尽快处理
回到顶部
点击反馈