To help dry the paper, the mold lets the water flow through the small wire squares.

In this paper we report the analysis of underfill encapsulation between the solder ball, micro-chip and substrate by experiment and3D mold flow simulation.

文中主要探讨了覆晶封装底胶充填时，锡球、芯片及基板间的流动状况。

互联网摘选

Experimental study of effects of mold flux on thermal flow of mold copper plate

保护渣对结晶器铜板热流影响的试验研究

互联网摘选

In this paper, based on the systematic analysis of the present situation of the sediment mathematical, a 1-D mathematical mold for unsteady flow and a non-equilibrium transportation model of non-uniform suspended load has been established to forecast the erosion and deposition.

本文在系统分析一维非恒定水流和泥沙数学模型研究现状的基础上，结合实际的天然河道冲淤预测的应用目标，建立了一维悬移质不平衡输沙数学模型。

互联网摘选

Then the basic process to use Mold flow software to realize the numral simulation of the fusion polymer filling the mould cavity is introduced.

然后重点说明了用Mold flow软件，通过有限元的方法实现熔融聚合物流体充填模具型腔时数值模拟的基本过程。

互联网摘选

The distribution of mold flow field can be reflected by readings of thermocouples embedded into the copper plates.

结晶器专家系统上显示的结晶器流场分布可以直接通过镶嵌在结晶器铜板上的热电偶变化趋势来反映。

互联网摘选

But the little essential understanding for the feedstock mold flow in MIM and the complexity of nonlinear system leads to the little development of the theory. But It will, no doubt, become an important part of the future research.

但由于在实际中对MIM喂料充模流动的本质认识的限制和非线性系统的复杂性，使得这种理论的发展也受到一定的限制，但无疑它将是未来研究的重要方向。

互联网摘选

The mold flow analysis utilizes the computer to simulate dynamic filling process about the injection mold.

模流分析技术是利用计算机对注塑件动态填充过程进行模拟。

互联网摘选

D Numerical Simulation on Mold Filling Coupling Fluid Flow and Heat Transfer in the Aluminium Alloy Casting

耦合传热与流动的铝合金铸件充型三维数值模拟

互联网摘选

Second, numerical simulation of filling, flow, air pocket, fusion trace, and warp were performed with simulation software Mold flow.

其次，利用仿真软件Mold flow对该注塑件进行充填、流动、冷却、气穴、熔接痕、翘曲等数值模拟。

互联网摘选

The characteristics of RTM ( Resin Transfer Molding) process are introduced, the mold filling flow, the gists of process controlling and the method of mold design of RTM to produce high accuracy plane radome are briefly described.

介绍了RTM（树脂传递模塑）工艺的特点，并对RTM法制造高精度飞机雷达罩的充模流动、工艺控制要点和模具设计方法等作了简要的论述。

互联网摘选

The mold is made of small squares of wire that hold the shape and thickness of the paper. To help dry the paper, the mold lets the water flow through the small wire squares.

模具由小的正方形的铁丝做成，可以控制纸张的形状和厚度。为了使纸张风干，模具允许水通过铁丝流失。

互联网摘选

CAE techniques ( such as plastic products mold flow analysis) are used for the post quality evaluation.

同时，采用产品模流分析等CAE技术对塑胶产品模具开发过程进行后期质量评估。

互联网摘选

Control of heat and mass transport in continuous casting mold through swirling flow in immersion nozzle

通过浸入式水口中的旋流控制连铸结晶器中热量和质量的传输

互联网摘选

Blowing argon gas had much effects on the mold flow field and temperature field.

向结晶器中吹入氩气后，对钢液的流场和温度场有较大的影响。

互联网摘选

Study on Effects of Heat Transfer Coefficient between Polymer and Mold on Melt Filling Flow in Micro Injection Molding

微注塑成型中熔体与壁面间传热系数对充模流动影响的研究

互联网摘选

Using CAE to design the mold of micro heat exchanger and optimizing the mold gate, flow runners and the cooling water channels.

采用CAE模拟辅助进行微流道微换热器模具的设计，对模具的浇口，流道以及冷却水道的开设进行的优化。

互联网摘选

Process window analysis, another part of mold flow analysis, examines melt temperature, mold temperature, injection pressure, and fill times.

加工窗口分析、它零件的模流分析，检查熔体温度、具温度、塑压力和充填时间。

互联网摘选

However, in a competitive market, more powerful software that can automatically estimate the optimum structure of the mold, analyze the flow of plastic and calculating mold strength would be ideal.

在当今竟争激烈的市场要求下，使用更为强大的软件，可以帮助估算最佳的模具结构，分析塑料的流动和计算模具的理想强度。

互联网摘选

Filter the redundancy vertex in STL solid is very important. The algorithm is successful to deal with 3D graphic in realistic mold flow simulation software.

而剔除STL面片数据中的冗余顶点是重构的关键，该算法已经成功应用于三维真实感注塑模流动模拟软件的3D图形处理。

互联网摘选

The basic features of the squeeze casting were described. The squeeze casting machine should possess the ability of smooth mold filling with low flow speed and large discharge quantity and increasing the squeezing pressure instantaneously.

叙述了挤压铸造的基本特点，对液态挤压铸造机要求具备低流速大流量平稳充填铸型和瞬时增压的能力。

互联网摘选