1、

Research and Application of Bimetal Casting Process Used for Abrasion Resistance Parts

双金属耐磨件复合铸造工艺试验

互联网摘选

2、

We used wood tar as a blending agent to produce shaped activated carbon and the abrasion resistance of it is larger than 85%; the BET surface area is 1577.55m2/g.

其中定型颗粒活性炭是用木焦油为粘合剂,最终产品的强度在85%以上,比表面积为1577.55m~2/g;

互联网摘选

3、

Currently around 10 million people worldwide each year require surgery to prevent corneal blindness, and another five million already suffer total blindness from corneal scarring caused by burns, lacerations, abrasion or disease.

目前全球每年有大约1000万人需要移植角膜来防止角膜盲。还有500万人由于烧伤、撕裂、擦伤或疾病导致角膜瘢痕而完全失明。

互联网摘选

4、

In conclusion, we know after the front suspension optimized, the front wheel alignment parameters is more reasonable. The variation of tread is minished so that the abrasion of the tire is reduced. And also the vehcile keep some understeering characteristic after front suspension optimized.

最后总结出优化之后的前悬架使得前轮的定位参数更加合理,减小了轮距变化量,从而降低了轮胎磨损,并保证了样车具有一定的不足转向特性。

互联网摘选

5、

The concrete durability under the compound action of freeze-thaw and abrasion is studied.

研究了冻融与磨耗复合作用下的混凝土耐久性能.

互联网摘选

6、

The aluminium dihydric phosphate coating is prepared and the properties of high temperature resistance, thermal shock resistance and abrasion resistance are studied.

试验制备磷酸二氢铝胶粘涂层,并测试了其耐高温,抗热震,耐磨等性能。

互联网摘选

7、

TEXTILES. WOVEN FURNISHING FABRICS. DETERMINATION OF RESISTANCE TO ABRASION.

纺织.家具用织物.抗磨性能测定

互联网摘选

8、

Mat down in areas subjected to pressure or abrasion.

灯芯绒的绒面上受压和磨擦的地方易于结块.

互联网摘选

9、

Analyses and discusses domestic overseas new type metallic card clothing steel wire material quality its development and several concerned questions, and raises several views improving card clothing abrasion resistance.

对国内外新型金属针布的钢丝材质和发展以及有关钢丝材质的几个问题进行了分析与研讨,并提出提高针布耐磨性能的若干意见。

互联网摘选

10、

Wear tests of 45 steel, as standard sample, and D8 、 D9 wear-resisting surfacing materials were carried out by sand slurry abrasion tester with vertical multi-clamps under concrete condition.

在多头立式磨损试验机上,以45钢(正火态)作为标准试样,选用D8、D9两种耐磨堆焊材料,在混凝土工况条件下进行了磨损试验。

互联网摘选

11、

The scratch, cold welding and abrasion are three kind of thread failure.

擦伤 、 冷焊和粘着摩损是粘扣失效的三种类型.

互联网摘选

12、

Nylon with very good abrasion resistance, peripherin-cured career Cup or blade of repeated friction.

尼龙具有非常好的耐磨性, 感光固化后能够胜任油盅或刮刀的反复摩擦.

互联网摘选

13、

Degumming with enzyme may overcome the drawbacks usually happen in soap-alkaline degumming process such as soap mark, stain, silk abrasion and crease mark.

酶脱胶可克服皂&碱挂练工艺中常出现的白雾、生渍、灰伤、皱印等疵病。

互联网摘选

14、

Study shows that quenched boron eutectic structure possesses the excellent wear abrasion property.

研究表明:硼共晶组织经淬火后,具有优良的抗磨粒磨损性能。

互联网摘选

15、

Study and Application of JME Modified Epoxy Mortar Erosion and Abrasion Resistant Materials

JME改性环氧砂浆抗冲磨修补材料的研究与应用

互联网摘选

17、

Objective To investigate the relationship between tooth abrasion and long-term chewing betel nut.

目的:探讨 长期 咀嚼槟榔与牙体磨损的关系.

互联网摘选

18、

Rands add to a boot's overall waterproofness and protect the upper from abrasion.

护皮增加鞋的全面防水能力,保护鞋面不受磨损。

互联网摘选

19、

The abrasion of a polymer formulation.

聚合体形成的磨灭.

互联网摘选

20、

Heavy torque and abrasion on casing are serious problems in drilling in slim hole.

高钻柱扭矩和套管过度磨损是小井眼钻井中存在的严重问题.

互联网摘选

  • 今日热词
  • 热门搜索

简答网英语词典(dict.jiandongshicai.cn)为您提供在线翻译英语词典单词大全英译汉汉译英等英语服务!可按单词字数词义分类查询。支持lj:关键词格式查询例句。

用户反馈
请选择反馈类型(可多选):
您的联系方式:(如需回复请填写联系方式)
反馈内容:
提交成功 小编会尽快处理
回到顶部
点击反馈