1、

Abrasive wear data of materials and material selecting for wearing parts

钢铁的磨损数据及易磨损零件的选材

互联网摘选

2、

The high chromium cast iron flux cored wire is an important kind of hard facing material with good cost performance and excellent anti-abrasive wear performance, which is widely used in metallurgy, mining, cement, construction machinery, dredging equipment and many other fields.

高铬铸铁药芯焊丝是一种重要的耐磨堆焊材料,广泛应用于冶金、矿山、水泥、工程机械、航道疏浚设备等领域,是抗磨料磨损性价比优异的堆焊材料。

互联网摘选

3、

Analysis on balling up caused by helicoid hydraulic motor bypass valve failure in combined drilling technology EXPERIMENTAL STUDY OF ABRASIVE-CORROSIVE WEAR OF MUD PUMP LINER

复合钻井过程中螺杆钻具旁通阀刺漏造成钻头泥包分析钻井泵缸套材料磨料&腐蚀磨损实验研究

互联网摘选

4、

Resin bonded silicon carbide grinding block during the grinding process, high grinding efficiency, good self sharpening abrasive tool, workpiece surface is not easy to burn and polishing performance and good processing properties, it can be widely applied in the field of material surface processing.

树脂结合剂碳化硅磨块在磨削过程中磨削效率高、磨具自锐性好、被加工工件表面不容易烧伤和抛光性能好等加工特性,因此在材料表面加工领域得以广泛应用。

互联网摘选

5、

The experimental results indicated that the abrasive ability of the titanium carbide bear comparison with that of artificial diamond, and exceed that of aluminum, silicon carbide and boron carbide very much.

结果表明:碳化钛的研磨能力可与人造金刚石相媲美,大大超过氧化铝、碳化硼和碳化硅。

互联网摘选

6、

The wear mechanism of original WC-Ni cemented carbide during the wear process is abrasive wear with the main characteristics of plastic deformation of Ni binder phase and fall-out of WC grains, and wear resistance depends on the hardness of cemented carbide.

原始WC-Ni硬质合金的磨损以Ni粘结相的塑性变形和WC晶粒脱落为主要特征的磨粒磨损,耐磨性依赖于硬质合金的硬度。

互联网摘选

7、

On the basis of erosion wear theory of materials and the abrasive water jet cutting process, the mechanisms of both casing cutting and formation rock cutting with hydraulic sand blasting perforation of oil wells are discussed, and the influencing parameters are investigated.

根据材料冲蚀磨损理论和磨料射流切割原理,对利用水力喷砂射孔技术切割套管和近井地层岩石的机理及其影响因素进行了分析。

互联网摘选

8、

The advantages of our rubber mat include high tensile strength, excellent abrasive resistant, various patterns etc.

我们生产的橡胶板高强力, 高耐磨, 花纹多样.

互联网摘选

9、

Derived from the Newton law and Hertz equation, a dimensionless quantity, called the relative erosion strength, is found to be a constant during the impacting of an abrasive particle on ductile materials.

从牛顿定律和赫兹方程导出一个称为量钢一的量的相对冲蚀强度,发现在磨拉冲击韧度材料过程中保持不变。

互联网摘选

10、

Study on the CMP Property of GaAs Wafer Using Nano Cerium Dioxide Abrasive

纳米CeO2磨料对GaAs晶片的CMP性能研究

互联网摘选

11、

This product is dry powder in the dry cleaning detergent softener can also can be used as abrasive material and emulsion stabilizer SC.

本品干粉在干洗清洁剂中可做软化剂,还可以作为研磨材料的悬浮剂和乳胶稳定剂。

互联网摘选

12、

Free abrasive wire saw technique is the main method for monocrystalline silicon slicing process.

游离磨料线锯切割技术是目前单晶硅切片的主要加工方法.

互联网摘选

13、

The content ( by vo lume) of the former should be ≤ 0.88% for ≤ 16% cobalt alloy. Those over 0.88% in the standard photograph are pseudoimages resulting from too large particle slie of abrasive materials during polishing.

含钴量≤16%的合金中,共晶石墨的体积含量应≤c.88%,标准照片中>0.88%的照片,是抛光时研磨料粒子太粗造成的假象;

互联网摘选

14、

Harder and more abrasive resistant steels are available to the designers-up to550 BHN can be applied in certain regions, and still with acceptable impact properties.

设计师能选择更硬更耐腐蚀的钢板-有些部位能使用最高至550BHN的钢板并且仍具有较好的抗冲击性能。

互联网摘选

15、

Abrasive Wear Mechanism of SHS Coatings of Chromium Carbide Cermet

碳化铬SHS熔覆层的磨料磨损机理研究

互联网摘选

16、

HH-type pump for low concentrations of high-lift transport slurry or a concentration of high-lift low-abrasive slurry.

HH型 泵适用于输送低浓度高扬程渣浆或高浓度低磨蚀的 高扬程 渣浆.

互联网摘选

17、

CSD is a new product of diamond abrasive.

CSD是一种金刚石磨料的新品种.

互联网摘选

18、

This paper uses grinding optics classcrystal diamond abrasive particles produced with the method of SCM.

采用冲击压缩法(SCM) 合成的多晶体金刚石磨粒,设计了磨削光学玻璃的实验装置.

互联网摘选

19、

Its comprehensive coverage focuses on key theoretical and practical considerations of abrasive wear.

它的广泛报导集中在磨损的关键理论和实践考虑。

互联网摘选

20、

ExhibIt'sand belt sand paper abrasive product , diamond sand wheel , Pitch cutting, Black lead cloth, etc.

展品:带、纸其异型品,石墨布 、 、瓷轮、割片 、 刚石轮等.

互联网摘选

  • 今日热词
  • 热门搜索

简答网英语词典(dict.jiandongshicai.cn)为您提供在线翻译英语词典单词大全英译汉汉译英等英语服务!可按单词字数词义分类查询。支持lj:关键词格式查询例句。

用户反馈
请选择反馈类型(可多选):
您的联系方式:(如需回复请填写联系方式)
反馈内容:
提交成功 小编会尽快处理
回到顶部
点击反馈