1、

The joint shapes suited for CO_2 welding are designed Under which weld quality is still assured but the groove angle and size of fillet weld are reduced. By ways of these the productivity is increased and cost decreased.

提出了适合于CO2焊特点的接头形式,该接头形式在保证焊接质量前提下,减小了对接焊的坡口角度及角焊缝的焊脚尺寸,可以提高焊接生产率,降低成本。

互联网摘选

2、

Effects of 45 ° Chamfer Angle and Fillet on Shrinkage Porosity ( hole) in Investment Castings

45°倒角与圆角对熔模铸件缩松(孔)的影响

互联网摘选

3、

This paper describes the causes of angle bump of float glass when conveyed at the cold end while being longitudinally cut on the production line.

探讨了浮法玻璃在冷端输送过程中,玻璃板在主线上纵向掰断并分开所产生的两块玻璃尾端碰角的现象。

互联网摘选

4、

The test result shows that the method is better than traditional method for measuring the zebra angle of float glass.

实验结果表明,该法优于传统的浮法玻璃斑马角测量法。

互联网摘选

5、

The measurement of the zebra angle of float glass with virtual Moire fringe method

虚拟莫尔条纹技术测量浮法玻璃斑马角

互联网摘选

6、

Procedure analysis of enlarging deflection angle of float glass

提高浮法玻璃光学变形角过程分析

互联网摘选

7、

The muscular function change in the lower extremity according to the angle of joint was assessed.

评定下肢肌肉功能随关节角度变化而发生的变化;

互联网摘选

8、

Ultrasonic Flaw Location of Angle Welded Joint with Inserted Take Over

插入式接管角接接头超声波探伤缺陷定位

互联网摘选

9、

A Study of Relation Between Fractal Dimension and Frictional Angle of Joint Profile

岩体节理形貌的分形维数与摩擦角的关系研究

互联网摘选

10、

Quality control and test of T-joint and angle welded joint in construction steel structure

建筑钢结构T型及角接焊接接头的质量控制与检测

互联网摘选

11、

The profile butt-welding is the most typical welding structure of ship welding, it includes the butt welding of outer plate, the butt welding of panel, the butt welding of web plate, the angle joint of outer plate and web plate.

型材对接焊是船舶焊接中最典型的焊接结构,包含了外板的对接焊缝、面板的对接焊缝、腹板的对接焊缝和腹板与外板的角接缝四条焊缝。

互联网摘选

12、

The last chapter puts forward suggestions and countermeasures to improve the profitability of credit card business from the angle of the issuing bank and government.

第五章分别从发卡行和政府角度提出提高信用卡业务盈利能力、改善盈利状况的建议和对策。

互联网摘选

13、

At the angle of bank management, it can be seen coming from the external factor and inside factor.

从银行管理的角度出发,更可将其认为来自银行外部因素和银行内部因素。

互联网摘选

14、

Institutional barriers faced to Country Bank when it has been build are analyzed from three angle of bank access, bank operations and bank retirement.

本章从银行准入、银行运营和银行退出三个角度分析了县域银行创设后面临的制度障碍。

互联网摘选

15、

Meanwhile, it also discusses the influence of roll yaw on sideslip in spin, and of moving round plumb line on angle of bank.

同时就尾旋中偏滚对尾旋侧滑的影响、绕铅垂轴旋转对坡度的影响等进行了讨论分析。

互联网摘选

16、

The seepage and erosion are primary dynamic influence factors on bank failure; and the soil composition, soil distribution and slope angle of bank are primary internal influence factors on bank failure.

指出了坡内的渗流作用与坡前水流的冲刷作用是岸坡发生崩塌的主要动力因素,而岸坡土体的物质组成和分布、岸坡坡度等则是岸坡发生崩塌的主要内在因素;

互联网摘选

17、

The simulation algorithms of wave high, yaw force, rolling moment and sway moment were put forward. Meanwhile, it also discusses the influence of roll yaw on sideslip in spin, and of moving round plumb line on angle of bank.

给出了随机海浪波高、横荡力、横摇力矩、艏摇力矩的仿真算法。同时就尾旋中偏滚对尾旋侧滑的影响、绕铅垂轴旋转对坡度的影响等进行了讨论分析。

互联网摘选

18、

The structural type of T-joint and angle joint in construction steel structure were expounded, the test characteristics of these structural type were explored, and the key point of control and test method for detecting flaw by supersonic was proposed in this paper.

本文论述建筑钢结构T型接头及角接接头的结构型式,探讨了这种结构型式的检测特点,提出了用超声波探伤的检测方法及控制要点。

互联网摘选

19、

It is presented that the differential pressure orifice flowmeter and the angle joint differential pressure measuring structure used in the test are the applied technologies of H2O2/ kerosene engine test.

提出了压差式孔板流量测量和角接式取压结构在过氧化氢/煤油发动机试验中的应用技术。

互联网摘选

20、

The machine is mainly used for extrusion and connection of 45 ° seam casement window with angle joint structure.

门窗单头组角机主要用于角码结构的平开门窗45°接缝的挤压联结。

互联网摘选

  • 今日热词
  • 热门搜索

简答网英语词典(dict.jiandongshicai.cn)为您提供在线翻译、英语词典、单词大全、英译汉、汉译英等英语服务!可按单词头尾、字数和词义分类查询。支持lj:关键词格式查询例句。

用户反馈
请选择反馈类型(可多选):
您的联系方式:(如需回复请填写联系方式)
反馈内容:
提交成功 小编会尽快处理
回到顶部
点击反馈