1、

The results indicate that the metastable defects shift toward to the deep of the gap and correlation energy increases with the light illumination time.

结果表明,缺陷态分布随光照时间向能隙深处移动,相关能增加。

互联网摘选

2、

Stress corrosion fractures often occurred in piping with defects in corrosive medium.

在严重的腐蚀介质中,压力管道等含缺陷构件常常易于发生应力腐蚀脆性断裂。

互联网摘选

3、

The Study of Defects in the Artificial Corundum Crystals

人工刚玉晶体的缺陷研究

互联网摘选

4、

The results showed that capillary crack was formed from the surface cavity of billet in the process of high temperature heating-rolling and cavity and sliver defects were formed due to part melting of seating face of heavy rail.

分析结果表明:发纹缺陷是由方坯表面气孔经高温加热-轧制演变成的,掉肉和小裂口则是因重轨踏面局部融熔所造成的。

互联网摘选

5、

There are some serious defects in the traditional cost system.

传统的历史成本制度存在严重缺陷。

互联网摘选

6、

L27/ 38 crankshaft folding defects mould key parameter optimization was researched, and through comparative analysis reasonable Die key parameters were obtained.

针对L27/38曲轴锻件折叠缺陷进行了模具关键参数优化,通过对比分析得出合理的参数选取范围。

互联网摘选

7、

However, the high benzoxazine resin curing temperature, low cross-linking density of the cured product, brittle and other defects restrict its application in some special fields.

但是,苯并恶嗪树脂固化温度偏高、固化产物交联密度偏低、性脆等缺陷制约了其在一些特殊领域的应用。

互联网摘选

8、

The Origins and Resolutions of Some Usual Defects of the Cold Curing HR PU Foam

冷熟化高回弹聚氨酯泡沫制品常见缺陷及解决方法

互联网摘选

9、

In the practical application of the equipment, fracture splitting defects such as drop clinker and slag inclusion can be reduced and the laser cutting parameters and hardness of lower limit can be improved.

裂解槽激光加工自动化设备在实际应用中,能够减少爆口、夹渣等裂解缺陷,并可以通过改变激光切割参数,改善硬度处于裂解工艺要求下限的连杆的裂解质量。

互联网摘选

10、

Cross-evaluation has also been introduced to overcome some defects from the CCR model of Data Envelopment Analysis and achieved complete ordering of these objects.

同时,为了克服数据包络分析的CCR模型的一些缺陷,在研究中引入了交叉评价的方法,实现了研究对象之间的完全排序。

互联网摘选

11、
13、

Measures prevent quality defects of external wall's granite decorative facing

如何防治花岗岩外墙贴面质量通病

互联网摘选

14、

Conclusion Combining volume rendering reconstruction with surface rendering reconstruction overcomes the defects of surface rendering reconstruction that is lack of internal anatomical information, which provides a new method for three-dimensional reconstruction.

结论面绘制与体绘制相结合的重建方法克服了面绘制缺乏内部解剖信息,过于模式化的缺点,为三维重建提供了一种新的研究方法。

互联网摘选

15、

The methods that can be used are: improve the cope hole; deal with the backing strip used for beam flange; strict the requirements for welding; reduce welding defects; remove the cracked parts; partial substitution of components.

采用的方法有:改进焊接工艺孔、对梁翼缘焊接垫板进行处理、严格焊接工艺要求,减少焊接缺陷、清除含裂纹部分、构件部分替换。

互联网摘选

16、

This paper describes the reasons for various kinds of defects of backing weld and their recognition on X_rays films It also introduces the protective measures for them

剖析带垫板焊缝中各种缺陷产生的原因及在射线底片上进行辨认的方法,并提出这些缺陷的防止措施

互联网摘选

18、

Expounds some problems to have to regard highly and need to solve in electronic data processing accounting in our country, points out existent defects of electronic data processing accounting, analyses the reasons and puts forward the countermeasures.

阐述了当前我国会计电算化过程中必须重视和需要解决的几个问题,指出了会计电算化存在的缺陷,并分析了原因,提出了对策。

provided by jukuu

19、

All claims relating to defects become time barred at the earliest two months after all claims the final customer may have been fulfilled.

与瑕疵相关的所有索赔权时效最早终止于最后的客户业已实现所有索赔权后的两个月。

互联网摘选

20、

The modern test theory demands that test report should not only give a test or ability scores, but also to provide the knowledge structure, cognitive defects and other information.

现代测试理论要求测试的结果不仅能给出一个测试分数或能力分数,而且要提供受测者的知识结构、认知缺陷等诊断信息。

互联网摘选

  • 今日热词
  • 热门搜索

简答网英语词典(dict.jiandongshicai.cn)为您提供在线翻译英语词典单词大全英译汉汉译英等英语服务!可按单词字数词义分类查询。支持lj:关键词格式查询例句。

用户反馈
请选择反馈类型(可多选):
您的联系方式:(如需回复请填写联系方式)
反馈内容:
提交成功 小编会尽快处理
回到顶部
点击反馈