1、

The system of the plant-line cycle method and low temperature and low humidity preservation of the breeder seed is introduced.

育种家种子的保存,应建立株系(行)循环法和低温低湿库双重保存制度。

互联网摘选

2、

An automatic surface quality inspection system installed on a finishing line of cold rolled strips is introduced. Surface defects on cold rolled strips, such as scratches, coil breaks, rusts, roll imprints, and so on are detected.

介绍一套在精整线上使用的冷轧带钢表面质量自动检测系统,该系统用于在线检测划痕、折印、锈斑、辊印等常见的冷轧带钢表面缺陷。

互联网摘选

3、

After Breakpoint, Symbol table and Debugging Agent theory introduced, this thesis focuses on the key technologies involved in a task-level debugging tool, including task level debugging, dynamic loading, Target Server and Target agent.

接着分析了断点,符号表,调试代理等基本技术,然后着重分析了任务级调试技术,程序动态加载技术,Target Server-TargetAgent等关键技术。

互联网摘选

4、

The equipments needed in nitrogen drilling construction such as compressor, nitrogen machine, booster compressor, rotary blowout prevention machine, and so on and their functions are introduced.

介绍了氮气钻井施工所需要的空压机、制氮机、增压机、旋转防喷器等设备及其功能;

互联网摘选

5、

The company has introduced international advanced level of the drainage pipe casing pipe fittings and electrical production, testing equipment and technology.

公司引进具有国际领先水平的给、排水管材管件及电工套管生产、检测设备和技术。

互联网摘选

6、

Abstract This paper introduced a new method of immerging insulation with taking motor's casing as the stator winding container of insulation paint, as to solve the problem for repairing the medium and large type electric motor without a special insulating equipment.

介绍了一种利用电机机壳作为定子绕组浸渍容器的沉浸绝缘处理新方法,从而较好地解决了修理大中型电机时没有专用浸渍设备的难题。

互联网摘选

8、

The low-level constraint relational model was introduced to record various constraint relations among parts and to check, improve and complete the reconstruction of the final assembly model, executing the result-oriented bottom-up design method; the parametric!

通过引入低层次的约束关系模型记录零件之间的各种约束关系,检验、改进和完成最终装配模型的重建,实现自底向上的面向结果的设计方法;

互联网摘选

9、

The design of control system of high-speed automatic bottling machine and its significance were introduced, including the procedure and requirements of the machine, the design of hardware system and software system, and the motion requirements of the equipment and the actual application effect of the machine.

介绍了高速自动装瓶机控制系统的设计及其意义,包括高速自动装瓶机的工作过程和要求、硬件系统设计、软件系统设计与设备动作要求及其实际应用效果。

互联网摘选

10、

The Bank of England has introduced sterner measures to control public borrowing.

英格兰银行在控制公众借款上采取了严格的措施。

provided by jukuu

11、

The condition and method for determing zinc oxide and boron trioxide in zinc borate by direct complexing titration is introduced.

介绍了采用直接络合滴定法测定硼酸锌中氧化锌和三氧化二硼的条件和方法。

互联网摘选

12、

The reaction sintering process and production process of ternary boride base cermet produced by reaction sintering method were introduced.

介绍了用反应烧结法制备三元硼化物基金属陶瓷的反应烧结过程及一般制备工艺过程;

互联网摘选

13、

For the casing pipe was broken down, the three-dimensional borehole television technology was introduced, it is a new technology that view the condition of downhole.

针对目前油水井井下套等损坏程度判断不清的现状,引进了管壁超声彩色成像测试技术,它是一项反映井下套管状况的新技术。

互联网摘选

14、

The reasons of low combustion efficiency and low boiler capacity are analyzed, the mechanism on combination combustion of the grate-fired boiler are introduced as well.

分析了SHL20-25/400型链条炉燃烧效率低及锅炉出力不够的原因,介绍了链条炉复合燃烧机理。

互联网摘选

15、

In this paper, the characteristics of TBM combined blowing technology in steelmaking plant of Meis-han has been introduced. And the influence of operation in medium phosphorous hot metal, metal charge consumption, converter lining after using this technology.

介绍TBM顶底复吹技术特征,在梅山炼钢厂应用时,以及运用该技术对冶炼中磷铁水操作、钢铁料消耗及炉衬的影响,通过使用TBM技术有效的改善了梅山的脱磷。

互联网摘选

16、

Introduced the causes of motion image blurring and geometric distortion and the methods to deblur.

随后又介绍了导致运动图像模糊及几何畸变的原因及对应消除模糊的方法。

互联网摘选

17、

The location principle of wider head bobbin holder of spinning machine is analyzed, and then the adjustment of the bobbin holder are introduced in detail.

分析了纺丝筒子座组合件的定位原理,详细介绍了筒子座组合件的调整方法。

互联网摘选

18、
19、

In this article, bonding pad design, stencil design and assembly process of QFN device will be introduced in detail.

文章对QFN器件的焊盘设计,网板设计及组装工艺作了详细的介绍。

互联网摘选

20、

The basic situation of the development, performance tests and relative technical standards and criteria of booster charge in China are introduced.

叙述了我国传爆药研究和性能检测的基本状况以及现有的传爆药综合技术标准和有关规范;

互联网摘选

  • 今日热词
  • 热门搜索

简答网英语词典(dict.jiandongshicai.cn)为您提供在线翻译英语词典单词大全英译汉汉译英等英语服务!可按单词字数词义分类查询。支持lj:关键词格式查询例句。

用户反馈
请选择反馈类型(可多选):
您的联系方式:(如需回复请填写联系方式)
反馈内容:
提交成功 小编会尽快处理
回到顶部
点击反馈