1、

In11-13+ 6 weeks, fetal nuchal translucency ( NT) thickness has become an important index of down's syndrome of early pregnancy screening.

孕11-13+6周胎儿颈项透明层(NT)厚度已经成为早孕期筛查唐氏综合征的重要指标。

互联网摘选

2、

But with the adding of an appropriate amount of ZZZ, the cohesiveness of blended coal was enhanced, the distribution of pore was improved, the porosity of coke decreased, the thickness of pore wall was improved, and the crackle of pore wall reduced.

但通过添加适量的ZZZ改性后,配合煤的黏结性指数得到提升,焦炭的气孔分布改善,气孔率下降,气孔壁厚度增加、裂纹减少。

互联网摘选

3、

Based on obtainedpapers, we studied preparing conditions of ( EIC ) column.

通过对无机、有机离子化合物,极性化合物的实际分离分析,讨论了 EIC 柱的制备条件对柱涂层厚度和使用寿命的影响.

互联网摘选

4、

With the decreasing of Al sheet thickness, constraint effect increase, and fracture toughness, JIC, also decrease.

随着其厚度尺寸的下降, 界面约束作用显著增强, 其断裂韧性, JIC值明显下降.

互联网摘选

5、

POF , economical and practical, has high tenacity, light weight and even thickness.

韧性强, 重量轻,厚度均匀, 经济实用.

互联网摘选

6、

Double-notch shear specimens with lower notch separation-to-thickness ratios were found to yield more uniform shear stress.

数值解析发现,当切口间隔与厚度之比较小时,双切口剪切试验片可产生较均匀的剪切应力分布.

互联网摘选

7、

I believe the solution lies in the calibration rather than the design.

我相信解决的方法在面板厚度校正的技术,而不是力木的设计.

互联网摘选

8、

TWB ( Tailor-welded Blanks) are welded into a whole board with two or more sheet metal of different thickness or material properties; the purpose is to make full use of material properties without waste.

拼焊是将两种或多种不同厚度或不同材料性能的金属板材焊接成一块整板,目的是使材料性能既得到充分的发挥又不会造成材料的浪费。

互联网摘选

9、

After knowing the structure nature frequency, optimize the structure, such as disposal the point of support, reduce the number of elbow, change the thickness of pipe, setting the dilatant and so on, which offer a basic to avoid resonance.

当知道结构固有频率后,便可以通过优化结构,例如重新布置支点、减少弯头数、改变管的厚度、设置膨胀圈等方法,改变结构的固有频率,为避开共振频率打下基础。

互联网摘选

10、

Three-Dimensional FEA of Large Opening Cylinder with Flatting Nozzle; Fabrication of Thick Metal Micromesh Sieves with High Open Area Using the UV-LIGA Process

大开孔率圆柱壳平齐接管结构三维有限元分析UV-LIGA技术制备大厚度高开孔率精细金属网板

互联网摘选

11、

Twenty cases with skin defect of forearm and hand were treated by free skin graft with subcutaneous fat from 0.5 to 0.7 cm in thickness.

报道带0.5~0.7cm厚度皮下脂肪的皮肤游离移植,治疗前臂和手部的皮肤缺损20例。

互联网摘选

12、

Last winter, ice thickness has contracted 19 % which sets a record.

去年冬季, 海冰的厚度收缩了创纪录的19%.

互联网摘选

13、

FCGR will decrease with thicker sample and smaller stress ratio at the same testing condition.

在相同实验条件下,试样厚度越大、应力比越小,疲劳裂纹扩展速率越低。

互联网摘选

14、

Objective: To study the diameters and vessel wall thickness of the dorsalis pedis artery and provide anatomic data for cannulation of the dorsalis pedis artery ( CDPA).

目的:研究国人足背动脉的直径和管壁厚度,为足背动脉置管提供解剖学依据。

互联网摘选

15、

The generalized S-parameter matrices of rectangular inductive irises are calculated based on a rigorous mixed method of the Mode Matching Method and the Conservation of the Complex Power Technique ( CCPT).

利用模式匹配的基本思想,结合复功率守恒法,考虑膜片厚度,推导出了矩形波导感性膜片不连续性的广义散射参数矩阵公式。

互联网摘选

16、

Effect of Solder Paste Volume on Reliability of CBGA Assemblies

焊膏厚度对CBGA组装板可靠性的影响

互联网摘选

17、

In the paper, based on the deformation theory, the author deduces the distribution regularities of strain, thickness of plate and real stress in the deforming region through analyzing stress and strain in the round hole burring process

通过对圆孔翻边应力应变分析,应用全量理论,推导出了变形区应变、厚度及变形时材料真实应力的分布规律

互联网摘选

18、

Make a test on vacuum filtrating dewatering agent with eight kinds of macromolecule flocculating agent and an analysis of the relations between the agent, the time of slime filtrated to form cake, thickness of the filtrated cake and moisture of filtrated cake.

采用了8种高分子絮凝剂,对细粒煤泥进行真空过滤脱水药剂试验;分析了药剂与煤泥过滤成饼时间、滤饼厚度、滤饼水分之间的关系。

互联网摘选

19、

Influence of sample thickness on the morphology of eutectic system

试样厚度对共晶组织形态的影响

互联网摘选

20、

There exists extremely notable linear ration between the thickness of dry sand bed and evaporating capacity.

干沙层厚度与沙丘表层的蒸发量之间存在极显著的线性关系;

互联网摘选

  • 今日热词
  • 热门搜索

简答网英语词典(dict.jiandongshicai.cn)为您提供在线翻译英语词典单词大全英译汉汉译英等英语服务!可按单词字数词义分类查询。支持lj:关键词格式查询例句。

用户反馈
请选择反馈类型(可多选):
您的联系方式:(如需回复请填写联系方式)
反馈内容:
提交成功 小编会尽快处理
回到顶部
点击反馈