合金的例句大全

, and YS ( yield strength) and the value of YS/ UTS increase through the followed artificial ageing with obvious loss of elongation.

而其后的人工时效处理能明显提高合金的屈服强度和屈强比，但也明显降低了延伸率。

互联网摘选

In the paper, the results of experiment are provided, the micro-mechanisms of both natural and artificial ageing are studied, and a new way to improve the mechanical properties of zinc-containing alloys is proposed.

文内提供了实验结果，并对自然时效和人工时效的机制进行了研究，为提高锌基合金型材的力学性能开拓一条新途径。

互联网摘选

New ways for corrosion prevention and decoration of magnesium alloy products were provided.

为镁合金产品的防腐装饰提供了新的途径.

互联网摘选

Argon arc welding of copper alloys and surfacing of steel.

铜合金氩弧焊及钢的堆焊用。

互联网摘选

The treatment of aluminium anodizing waste water is discussed.

讨论了铝合金表面阳极氧化生产线工艺废水的产生和处理问题。

互联网摘选

Structure, Composition and Corrosion Resistance of Mg Alloy Anodized Film

镁合金阳极氧化膜的结构、成分及其耐蚀性

互联网摘选

However, when the content of Si is about 10%, its plasticity is poor, particularly in cold-rolling process. The poor plasticity led to the strip breakage in rolling process and it reduced the rate of finished products.

然而，4004Al-Si合金，由于含Si量在10%左右，塑性差，特别是冷轧性能差，进而导致轧制过程中易产生断带，成品率低。

互联网摘选

On the antiferromagnetism and high damping capacity of Mn-Fe alloys

Mn-Fe基合金的反铁磁与高阻尼

互联网摘选

Fcc Antiferromagnetism and Martensitic Transformation in Fe Mn Si Based Alloys

Fe-Mn-Si基合金fcc反铁磁与马氏体相变

互联网摘选

Statistical theory of type I antiferromagnetism and ab alloy superlattice on a face centered cubic lattice-a series expansion method

面心立方点阵上Ising自旋1/2系统反铁磁性和AB合金超点阵的统计理论&配分函数的级数展开法

互联网摘选

The Influence of the Applied Load on Shape Recover and Phase Transformation in a Ti-Ni Alloy

附加载荷对Ti-Ni合金形状恢复及相变的影响

互联网摘选

Clear images of the MIG welding pool are obtained by using the technology of narrow band filter, which used to overcome the influence of strong arc light.

通过窄带滤光结构，有效地克服了弧光干扰，并获得了比较清晰的铝合金MIG焊熔池图像。

互联网摘选

Sensing Droplet Transfer Mode by Arc Light Radiation in Pulsed MIG Welding Using a Aluminium Alloy Electrode

铝合金脉冲MIG焊熔滴过渡的弧光传感

互联网摘选

Influence about Weld Joint Property and Destruction of Aluminium Lithium Alloy by Argon Arc Welding Method

氩弧焊接方法对铝锂合金焊接接头性能和破坏的影响

互联网摘选

Argon Arc Welding Technology of Titanium Alloy Antenna

钛合金天线氩弧焊工艺研究

互联网摘选

Argon Arc Welding Process for Al Li Alloy

铝锂合金的氩弧焊工艺

互联网摘选

Characteristics: Material technics: aluminium alloy of high heat conductivity and patented configuration technics.

产品特点材质工艺: 采用导热性能极高的铝合金及专利结构技术设计生产.

互联网摘选

The content of nitrogen in alloy constructional steel was rapidly determined by photoelectric spectrometer.

本文叙述了用光谱仪快速定量分析合金钢中的氮.

互联网摘选

The results show that corrosion rate increases with increasing SO 2 content in the atmosphere.

结果表明:SO2加速镁合金的腐蚀,随着SO2含量增加,镁的腐蚀速率加快.

互联网摘选

Microstructure and Properties of WC-steel Composite Coating Produced by Argon-arc Welding

氩弧熔覆WC-钢结硬质合金涂层组织性能研究

互联网摘选