Study on Mechanical Properties of TPV Made by A Tri-screw Dynamic Extruder

1、

The method is effective for fully vulcanized blending mode TPV.

此制样方法对于完全硫化共混型热塑性弹性体是有效的。

互联网摘选

2、

That depth is what we call the air's total precipitable water ( TPW). Normally, the TPW is 1 or 2 centimeters.

这个深度就是我们所说的空气的总可降水量（TPW）。通常来说，总可降水量为1～2厘米。

互联网摘选

3、

A physical retrieval method of total precipitable water ( TPW) by GMS-5 satellite infrared-split window channels and MODTRAN radiative transfer model was developed.

利用GMS-5多通道资料和MODTRAN辐射传输模式设计并实现了用卫星红外分裂窗通道反演大气可降水的物理反演算法。

互联网摘选

4、

We'll imagine our storm measures 100 kilometers on each side and has a high TPW content of 6 centimeters.

不妨假设一个暴雨云团长宽各100千米，具有较高的总可降水量——6厘米。

互联网摘选

5、

Graduates join the TPW network where they can collaborate with other alumni to increase their influence.

课程结业者将加入慈善研讨课程网络，在这里，他们可以与其他校友携手合作，提高其影响力。

互联网摘选

6、

The comparison results show that these national reference values of TPW are in good agreement within 0.171? mK.

比对结果表明：这些国家基准水三相点值在0.171mK范围内一致。

互联网摘选

7、

Additionally, in order to reduce systematic differences in realization of TPW among the national laboratories, it is very necessary to further investigate the effects of isotopic composition on the triple point temperature of water, and corrections for isotopic composition.

此外，为了减小国家实验室复现水三相点的系统差，需要进一步研究同位素组成对水三相点温度的影响以及同位素修正。

互联网摘选

8、

The temperature variations of the realized plateau of the TPW within 20 hours were less than 0.2 mK, which could meet the needs for the high-precision temperature measurement.

在20小时内复现的水三相点温坪变化小于0.2mK，可以满足高精度温度测量的需求。

互联网摘选

9、

Researches showed that some polyolefins such as polypropylene ( PP), polyethylene ( PE), poly ( ethylene-co-vinyl alcohol) EVAL, ethylene-acrylic acid coplymer ( EAA) and poly ( 4-methyl-1-pentene)( TPX) are materials of making microporous through thermally induced phase separation.

研究发现聚乙烯、聚丙烯、乙烯乙烯醇共聚物、乙烯丙烯酸共聚物、聚（4甲基1戊烯）等聚烯烃是可采用热致相分离法制备微孔膜的材料。

互联网摘选

10、

In this paper the processing methods and applications of TPX were reviewed Injection moldin, extrusion, blow molding and so on were included.

本文重点介绍了TPX的常用加工方法，如注塑成型、挤出成型和吹塑成型等；

互联网摘选

11、

Experiment indicated that TPX mould was an ideal plastic mould for casting of epoxy resin which was suitably curing at high or middle temperature.

实验表明它是一种适用于高、中温固化环氧树脂浇铸成型的理想的塑料模具。

互联网摘选

12、

In this paper, TPX plastic mould for Casting of for epoxy resin have been introduced.

介绍了一种用于环氧树脂浇铸成型的新型塑料模具。

互联网摘选

13、

Poly-4-methyl-1-pentene ( TPX) were widely used based on its so many excellent properties.

聚4-甲基戊烯-1（TPX）众多的优良性能为其广泛应用奠定了很好的基础。

互联网摘选

14、

Development of TPX-ⅱ water and oil repellent finishing agent for polypropylene fiber

TPX-Ⅱ型聚丙烯拒水拒油纤维整理剂的研制

互联网摘选

15、

However, the traditional measurement of TPY current transformer often requires high voltage and high current environment, which brings complexity and noise interference of the measurement.

但是，传统的TPY级电流互感器的测量方法往往需要高电压、大电流环境，测量过程繁琐，噪声干扰大。

互联网摘选

16、

Therefore, the achievement of rapid and effective measurement of TPY current transformer has a significant meaning to the production and improvement of current transformers.

因此实现TPY级电流互感器的高效快速测量对电流互感器的生产与改进有重要意义。

互联网摘选

17、

EBE monitored control system is an assistant to operator of 2000 TPY phthalic anhydride plant.

EBE监视系统是2000t/a苯酐装置操作人员的有力助手以蒸馏水为溶剂，在233nm处测定吸光度，经方法学验证，适用于该品体外控制。

互联网摘选

18、

The air gap current transformer, especially TPY current transformer which has transient protection features is more and more widely used.

具有暂态保护特性的开气隙电流互感器&特别是TPY级电流互感器在电力系统中获得了越来越广泛的应用。

互联网摘选

19、

Analysis and control of HP air cooler corrosion in a 36.000 b/ d TPY gas oil hydrodesulfurization unit

1.8Mt/a蜡油加氢脱硫装置高压空冷器腐蚀分析和控制

互联网摘选

20、

Technical Transformation of 5000 tpy Unit of Liquid Phase Bulk Polymerization of Propylene

5千吨/年液相本体法聚丙烯装置的技术改造

互联网摘选