Acrylamide Monomer is a very low-level residual by-product from the manufacture of polyacrylamide ( PA) gel that is commonly used in some of the products to help create the ideal thickness and feel.

1、

What is the risk of illness from using skin care products contaminated with acrylamide monomer?

使用含有微量丙烯酰胺单体的化妆产品是否会构成安全上的疑虑？

互联网摘选

2、

Using acrylamide as monomer and by homopolymerization posthydrolysis procedure, the polyacrylamide with relative super-high moleculer weight is synthesized for oil driving in oil field.

考察了水解剂、水解温度、水解时间、水解剂用量等因素在后水解过程中对聚合物相对分子质量的影响。

互联网摘选

3、

Analysis of acrylamide monomer content in amazing

奥美定中丙烯酰胺单体含量的分析

互联网摘选

4、

Residual acrylamide monomer is typically not found in cosmetics and, if present, is very unlikely above this limit.

丙烯酰胺单体残留物一般不会在化妆产品中发现，若然存在亦不会超出上限标准。

互联网摘选

5、

Dispersion Copolymerization of Acrylamide/ Cationic Monomer in Salt Aqueous Solution

AM/阳离子单体在盐水介质中的分散聚合

互联网摘选

6、

Synthesis of fluorescent-labelled acrylamide monomer

荧光标识丙烯酰胺单体的合成

互联网摘选

7、

Heat evolution of the system was measured to characterize the polymerization process of acrylamide monomer in ceramic slurry.

采用单体聚合反应的热效应来表征含有陶瓷粉体的单体聚合体系的聚合过程方法，首次采用该方法分析了含有陶瓷粉体聚合体系的聚合热效应与单体聚合转化率的关系。

互联网摘选

8、

The surface modified SiC fine powder was prepared by organic coating through silane coupling agent hydrophobic processing and acrylamide monomer graft polymerization on its surface.

通过硅烷偶联剂疏水预处理和丙烯酰胺在其表面接枝聚合改性，获得了有机包覆的改性SiC微粉。

互联网摘选

9、

An acid-proof high water-absorbing resin was prepared from acrylamide as monomer, K_2S_2O_8 as initiator, and N, N'-methylene-bis-acrylamide as crosslinking agent by aqueous solution polymerization and then by sulfonation reaction.

以丙烯酰胺（AM）为单位，K2S2O8为引发剂，N，N′-亚甲基双丙烯酰胺为交联剂，进行水溶液聚合，再对产物进行磺化反应，制得耐酸性高吸水性树脂。

互联网摘选

10、

Refining and Impurity Control on Production of Acrylamide Monomer by Biochemical Technology

生化法生产丙烯酰胺单体中杂质控制及精制

互联网摘选

11、

Regulatory agencies around the world consider that low levels of residual acrylamide monomer in cosmetic products similar to what has been reported do not represent a safety concern for consumers.

全球的监管机构认同在类同测试中发现的微量丙烯酰胺单体残留物不会对使用者构成安全问题。

互联网摘选

12、

It has also been found that, the polymerization rate of cyclic phosphoester monomer is highly depended on the structure of pendant side group and the ring substituent group when using stannous octoate as the catalyst.

研究还发现，以异辛酸亚锡为催化剂的磷酸酯单体的聚合速率与磷酸酯单体的侧基、环取代基密切相关，而且可以方便利用聚磷酸酯侧基对高分子进行功能化修饰。

互联网摘选

13、

Studies on Relationship Between Component Distribution of Aryl Cyclic Oligomers and Its Monomer's Structure

芳香环状低聚物组分分布与单体结构关系的研究

互联网摘选

14、

At present, the major method to synthesize polyester is the ring opening polymerization ( ROP) of cyclic ester monomer with the metal alkoxides as initiators.

目前合成聚酯的方法主要是利用金属配合物催化/引发环化酯单体开环聚合。

互联网摘选

15、

Functionalization of ethylene propylene diene monomer with maleic anhydride in melt state through high shear stress-induced initiation

高剪切应力诱导引发马来酸酐官能化三元乙丙橡胶

互联网摘选

16、

Thermoplastic vulcanizate ( TPV) based on ethylene propylene diene monomer ( EPDM)/ polypropylene ( PP) blends using dicumyl peroxide as curing agent were studied in this work.

研究了交联剂1,2-聚丁二烯在三元乙丙橡胶（EPDM）/聚丙烯（PP）热塑性硫化胶（TPV）中的作用。

互联网摘选

17、

The properties of middle-temperature vulcanization ( MTV) ethylene propylene diene monomer ( EPDM) insulation were introduced. The influence of accelerant types on vulcanizing properties of EPDM was discussed.

介绍了中温（80℃）硫化三元乙丙橡胶（EPDM）绝热层的各项性能，考察了促进剂种类对EPDM硫化特性的影响。

互联网摘选

18、

As a kind of novel modifier, its toughening ability is better than that of ethylene propylene diene monomer ( EPDM) or ethylene propylene copolymer ( EPM), whether in homopolymer polypropylene, copolymer polypropylene or high fluidity polypropylene.

无论是均聚、共聚还是高流动性聚丙烯，POE的增韧效果都优于三元乙丙橡胶（EPDM）或乙丙橡胶（EPM）。

互联网摘选

19、

Ethylene-vinyl acetate ( EVA)/ ethylene propylene diene monomer ( EPDM)/ poly-vinyl chloride ( PVC) ternary plastic alloy non-rigid foam was produced by physical blending and chemical crosslinking moulding foaming process.

采用物理共混及化学交联模压发泡工艺生产乙烯-醋酸乙烯酯共聚物（EVA）/三元乙丙橡胶（EPDM）/聚氯乙烯（PVC）三元塑料合金软质泡沫体。

互联网摘选

20、

Ethylene propylene diene monomer/ polypropylene thermoplastic elastomer modified with in situ prepared zinc dimethacrylate

原位合成甲基丙烯酸锌改性三元乙丙橡胶/聚丙烯热塑性弹性体

互联网摘选