Research on economy of concrete curing by high performance curing agent

1、

Research on water glass concrete curing compound

水玻璃系混凝土养护剂的研究

互联网摘选

2、

Application of concrete curing agent cement concrete pavement of high grade highway

混凝土养护剂在水泥混凝土高级路面中的应用

互联网摘选

3、

Role of moist therapy in curing dermal radio lesions

湿性疗法在治疗皮肤放射性损伤中的作用

互联网摘选

4、

No matter what it is, NSC or HSC, at the 6th day. All mechanical parameters can reach around 90% of 27 day' moist curing.

无论是NSC还是HSC，标准养护6天的力学参数都能达到标准养护27天的90%左右。

互联网摘选

5、

The test results show that the longer the time of moist curing, the higher the values of compressive strength, splitting tensile strength, elastic modulus and critical stress intensity factor.

试验结果表明，抗压强度、弹性模量、抗拉强度以及临界应力强度因子随标准养护时间的增长而增大，弹性模量对养护条件的敏感性最大。

互联网摘选

6、

At steam curing and moist curing conditions, the mechanical properties of concrete with different fineness and different proportions of ultrafine fly ash slag composite were studied.

研究了在蒸汽养护和标准养护条件下掺粉煤灰-矿渣复合超细粉混凝土的力学性能。

互联网摘选

7、

The numerical simulation method can be used to optimize the curing temperature cycle, which can improve the quality of composite products.

模拟程序可以计算得到任意时刻复合材料内温度及固化度分布，通过数值模拟可以有效地优化固化加热工艺参数，提高产品质量。

互联网摘选

8、

The improvement of peroxide crosslinked EPDM properties with trimethylolpropane triacrylate ( TMPTA) was studied. It was found that the crosslinking rate and crosslinking density increased and the curing cycle time reduced with the addition of TMPTA in the peroxide crosslinking system for EPDM/ silica compound;

在EPDM／白炭黑胶料的过氧化物硫化体系中，加入三羟甲基丙烷三丙烯酸酯（TMPTA）能够迅速提高硫化胶的交联效率，增大网络密度，缩短硫化时间；

互联网摘选

9、

The test results showed that at a tailings/ cement ratio of 6 ∶ 1 and paste backfill density of 80% and 28 day curing cycle, the compressive strength reached 3.79 MPa;

试验结果表明，在尾砂水泥比为6∶1，浓度80%时，28d抗压强度达到3.79MPa；

互联网摘选

10、

The curing cycle shortened significantly as the level of Calcene CC in SBR or BR compounds increased.

在SBR和BR胶料中随白燕华CC用量的增大，硫化时间明显缩短。

互联网摘选

11、

The curing cycle of polymeric composites has significant effect on its performance and economic indices.

聚合物基复合材料的固化制度是影响其性能经济指标的重要因素。

互联网摘选

12、

Study on the Appearance and Chemical Variation Relationship of Burley Tobacco Leaves in Air curing Process

白肋烟晾制过程中烟叶外观变化与内在变化关系的研究

互联网摘选

13、

Studies on change of main chemical components of burley tobacco during air curing process

不同晾制阶段白肋烟主要化学成分的变化

互联网摘选

14、

Sealant such series of the water used for air curing.

此类密封胶系列用空气中的水分进行硫化。

互联网摘选

15、

Contrast Study on Properties of Three Type Air Curing Fluorocarbon Coatings

三种常温固化氟碳涂料性能的对比研究

互联网摘选

16、

The property of type 750 bulk Curing Barn baking chamber and the matching baking technology was the Gradual baking technology.

即750型卧室密集型烤房相匹配的烘烤工艺为：渐进式烘烤工艺。

互联网摘选

17、

The two problems such as the escape of SiF 4 gas and the break of cutting axle, occurred in curing chamber in calcium superphosphate production, were analyzed. The reform measures were put forward and put into effect, so that those two problems were solved.

分析了过磷酸钙生产中化成室出现的氟气外溢与切削器断轴两大问题，提出了改进措施，实施后上述问题得以解决。

互联网摘选

18、

Oxygen is purged from the chamber using nitrogen gas, which is introduced in a controlled manner via a'nitrogen knife'at the web inlet and via an injector in the curing chamber.

清除氧是由室内使用氮气，这是实行控制的方式通过'氮刀'在网络入口，并通过一个注射器在治疗室。

互联网摘选

19、

Design of Curing Chamber Heat System for Colored Cement Tile and Their Curing Technology

彩色水泥瓦养护窑供热系统的设计及其养护工艺

互联网摘选

20、

Controlling the oxygen level within the curing chamber is simply a matter of adjusting the nitrogen flow rate until the desired reading is obtained.

控制范围内氧气水平的固化室是一件简单的事，调整氮气流量，直至理想的阅读获得。

互联网摘选