The design of bending forming mill of solar energy water-heater support, which is applicable to the village usage, was introduced.

1、

Numeric Control Profiling Saw Cutting-off Technology of Large Size ERW Welded Pipe Development of ERW Straight Welded Pipe Forming Mill

ERW钢管的数控仿形锯切技术概述ERW直缝焊管成型装置的发展

互联网摘选

2、

Briefed in the paper are the invention and development history of the ERW straight welded pipe forming mill.

简要介绍了ERW直缝焊管成型装置的产生和发展历程。

互联网摘选

3、

Development of φ 219mm medium-sized welded pipe forming mill

Φ219mm中径焊管成型机组的研制

互联网摘选

4、

Development of ERW Straight Welded Pipe Forming Mill

ERW直缝焊管成型装置的发展

互联网摘选

5、

Thin Wall Thickness Electric Welded Pipe Produced by CBR Forming Mill

采用CBR成形机组生产薄壁电焊钢管

互联网摘选

6、

The Design of Bending Forming Mill of Solar Energy Water-heater Support

太阳能热水器支架弯曲成形机的设计

互联网摘选

7、

The influence of many factors, such as the content of filled magnetic particles, forming conditions and pulse electric discharge magnetization on the magnetic and mechanical properties of the magnetic strips has also been studied.

探讨了磁粉填充量、成型工艺条件、脉冲放电充磁等因素对磁性塑料条磁性能、力学性能的影响。

互联网摘选

8、

Magnetic material wet forming hydraulic press The prediction of the burst pressure of pressure vessels with miter pipe

磁材湿式成型液压机轴向斜接管内压容器爆破压力的预测

互联网摘选

9、

Magnetic repulsive force forming in plate interface and distribution of global large/ super-large gold deposits

板块界面磁斥力形成与全球大型-超大型金矿分布规律初探

互联网摘选

10、

The deformation rate of magnetic pulse forming is 100-1000 times as that of the Quasi-static forming, and magnetic pulse forming can expand the forming limit of metallic materials effectively and lead to a series of improvements in materials' mechanical properties and microstructure.

磁脉冲成形的变形速率为准静态成形的100-1000倍。能显著提高金属的成形能力，同时，可使材料从微观组织到力学性能产生一系列的改变。

互联网摘选

11、

The finite-element analysis of bulging process has been made to investigate the effects of geometry of the magnetic impulsive forming system on the final deformation.

通过铝板毛坯胀形过程的有限元模拟，分析了磁脉冲成形系统几何参数对终态变形的影响。

互联网摘选

12、

An Investigation of the Effects of Geometry of the Flat Workpiece Magnetic Impulsive Forming System on the Final Deformation by the Finite-element Analysis

板坯磁脉冲成形系统几何参数对终态变形影响的有限元分析

互联网摘选

13、

Combined magnetic forming machine and its application

磁力成形组装机及其应用

互联网摘选

14、

Through experiments and FEM of ANSYS/ LS_DYNA program, the deforming mode for free electromagnetic forming and modeled forming of sheet metals are analyzed.

通过实验及ANSYS/LS DYNA程序的有限元模拟，对平板件的电磁自由成型及有模成型的变形模式进行了研究。

互联网摘选

15、

The Elastoplastic FEM Simulation of Free Bulge Forming of Metal Tubes under Internal Pressure and Axial Compression

金属园管在内压及轴向压力作用下自由胀形的有限元法模拟

互联网摘选

16、

The influences of the kind, the volume fraction and the relative hardness of the second phase and of plastic strain ε in steel as well as of initial surface roughness R_0 on the surface roughening behaviour in free forming are investigated.

研究了塑性变形量ε、钢中第二相的种类、数量和相对硬度比及初始表面粗糙度R0对自由成型表面粗糙化行为的影响。

互联网摘选

17、

The influence of dispersant and PH on the HA slurry was firstly researched in this paper. Combined with MAM free forming tests of scaffold fabrication, it was analysed that solid fraction had effects on the scaffold processing.

浆料的性质决定了支架的成形效果和性能，本文首先研究分散剂和PH值对HA浆料分散体系的影响，并结合MAM自由成形实验分析了固相率对浆料喷射成形性能的影响。

互联网摘选

18、

Forming with conical die and fillet die has a special condition of dieless constrained and free forming, so the forming part has low dimension accuracy.

另外，由于用锥形模和圆角模翻管过程中存在无约束的自由变形，所成形零件的尺寸精度较低。

互联网摘选

19、

It found that with the same load amplitude and different loading times, several different deformation modes exist no matter for free forming or for modeled forming.

发现在载荷幅值相同、加载时间不同时，无论是自由成型还是有模成型，都存在着几种不同的变形模式。

互联网摘选

20、

High effi ciency free forming technology for H-beam

H型钢的高效率自由成形技术

互联网摘选