1、

The cured fish products under the conditions above were safe for eating.

在试验条件下生产的腌腊鱼制品是安全的。

互联网摘选

2、

Influence of different slow cooling conditions on seperating cuprous sulfide from nickel sulfide

不同缓冷条件对分离硫化亚铜与硫化镍效果的影响

互联网摘选

3、

The effect of solution, reduction temperature, reduction time and pre-reduction process on the preparation of 13X loading with cuprous ion were examined and the preparing conditions were optimized.

实验考察了负载溶液、还原时间、还原温度以及预处理等方面对吸附剂制备的影响,得到了制备载铜13X吸附剂所需要的最优化条件。

互联网摘选

4、

Influence of Catalytic Reaction Conditions on Epoxidation of Propylene with Cumene Hydroperoxide

过氧化氢异丙苯环氧化丙烯的催化工艺

互联网摘选

5、

Hydraulic study of valve with extra long emptying culvert of the Three Gorges Lock's last chamber ( 3)& Measures improving the valve working conditions with emergent valve closing

三峡船闸末级闸首超长泄水廊道中阀门水力学关键问题研究(3)&事故动水关闭情况下改善阀门工作条件的措施

互联网摘选

6、

Effects of Technical Conditions on Cultured Egg-Milk ( Set-Type) Production

工艺条件对凝固型发酵蛋奶生产的影响

互联网摘选

7、

As the artificial cultivation ginseng has long growth cycle which demanding the cultivation conditions and the complexity technical management that makes it difficult to control the quality of cultivated ginseng.

由于人工栽培人参生长周期长,对栽培条件要求严格,栽培管理技术复杂,使栽培人参质量难以控制。

互联网摘选

9、

By constructing a Lyapunov function, the sufficient conditions for global stability of the positive equilibrium are obtained. ( 2) Coupled oscillator systems with delayed feedback is considered, when angular frequency is a constant.

通过构造李雅普诺夫泛函,给出了模型正平衡点全局稳定性的充分条件。(2)在角频率相同的条件下,对一类时间延迟耦合振荡器模型进行了研究。

互联网摘选

10、

The preparation of potassium sulfate with Solvent extraction studied. The technology conditions are determined by experiments.

提出了用溶剂萃取法制取硫酸钾的新工艺,并通过中试确定了工艺条件.

互联网摘选

11、

Objective To solve the motor fatigue of the athletes Under 3-military-event training in altitude conditions by taking Anti-fatigue Nutritious Drink.

目的通过服用抗疲营养饮,解决高原环境下军事三项运动集训队员的运动性疲劳。

互联网摘选

12、

In the process, they hope eventually to give consumers more personalized advice about what to eat and drink to stave off heart disease, cancer and other chronic conditions of aging.

希望能为消费者更个性化的建议,即应如何健康饮食以和延缓心脏疾病、癌症和老年慢性病。

互联网摘选

13、

Optimizing operation conditions for cracked gasoline olefin reduction

优化工艺条件降低汽油烯烃含量

互联网摘选

14、

Unsaturated polyester resin ( UPR) wastes pyrolysis was cracked to prepare feed stock, and process conditions of catalytic cracking reaction were introduced systematically.

对不饱和聚酯树脂(UPR)废料裂解制原料油技术进行了研究,系统地考察了催化裂解反应工艺条件。

互联网摘选

15、

Calculation formulas are established based on the functions of given movement and dynamical conditions by means of extremum theory, making analytical design of an offset slider crank mechanism more convenient and good for extend.

本文根据偏置曲柄滑块机构的运动特性和传力特性所建立的函数关系,运用极值理论推导出给定条件下传力特性最佳的计算公式,大大方便了设计应用,值得推广。

互联网摘选

16、

A special photocurable acrylic cresol phenolic resin containing free epoxy group ( AAFEE) which can be dissolved in1% Na2CO3 was synthesized, it preparation conditions were studied in detail.

以含环氧基的光敏性丙烯酸酚醛环氧树脂为原料合成了一种可以在1%的碳酸钠溶液中溶解的光敏性酚醛环氧树脂(AAFEE),研究了该树脂的合成条件及工艺。

互联网摘选

17、

Then, rolling motion equation in long-crested wave, based on the linear rolling theory, is established. Secondly, the change of ship rolling motion in multiple conditions is analyzed.

然后,在此基础上,依据船舶线性横摇理论,建立船舶在长峰波海浪中的线性横摇运动方程。(二)分析多工况条件下船舶横摇运动的变化。

互联网摘选

18、

The thesis analysis is made on the crimp property of polyester/ modified high shrinkage polyester conjugated fiber. The crimp property of three kinds of conjugated fiber in different conditions such as heat processing ways, temperature and time is tested.

对聚酯/改性高收缩聚酯复合纤维的卷曲性能进行了理论分析,并测试了不同组分比例以及不同热处理方式、温度、时间条件下的聚酯/改性高收缩聚酯复合纤维的卷曲性能。

互联网摘选

19、

The deformation is just like a crooked stick to produce a deformation under the external forces in mechanics, or like a smooth error curve fitted by given conditions adding up to original curve in mathematics.

基于物理模型的B样条曲线变形在力学上类似于一根曲杆在外力作用下产生整体变形,其数学模型上就好像在原有曲线的基础上,加上了一条光滑的误差拟合曲线。

互联网摘选

20、

Test results show that the carbide can be precipitated and grown isothermally from high-temperature austenite on carburization. The formation of massive carbide under ordinary carburizing conditions is the result of accumulative growth and its mean diameter is proportional to the cubic root of time.

试验结果表明,渗碳时碳化物可以直接从高温奥氏体中恒温析出和长大,一般渗破条件下形成的块状碳化物是集聚式长大的结果,其平均半径和时间的1/3次方成正比。

互联网摘选

  • 今日热词
  • 热门搜索

简答网英语词典(dict.jiandongshicai.cn)为您提供在线翻译英语词典单词大全英译汉汉译英等英语服务!可按单词字数词义分类查询。支持lj:关键词格式查询例句。

用户反馈
请选择反馈类型(可多选):
您的联系方式:(如需回复请填写联系方式)
反馈内容:
提交成功 小编会尽快处理
回到顶部
点击反馈