1、

Brief introduction on recovery treatment of deteriorated lubricant and coolant oil

陕北石油秩序简述润滑、冷却用油劣化后的再生处理

互联网摘选

2、

Investigations on the effects of various experimental parameters indicate that fuel composition, engine load, air/ fuel ratio, temperatures of coolant and oil, and testing time significantly affect the sludge formation.

指出燃料组成、发动机负荷、空燃比、冷却液和机油温度以及试验时间是影响油泥生成的重要因素。

互联网摘选

3、

Check coolant quantity, engine oil quantity in oil pan and fuel injection pump, check "three leakages" situations.

每天进行日常维护,检查冷却水量、油底壳及喷油泵内的机油量、检查“三漏”情况。

互联网摘选

4、

Effects of air coolant injection on cascade surface pressure distribution

冷气喷射对直叶栅型面压力分布影响的实验研究

互联网摘选

5、

The leading and trailing inserted tube for air coolant on an aeroengine is a thin wall component, it is made of Inconel 625 alloy sheet ( thickness 02mm).

航空燃气涡轮发动机前后冷气导管是一薄壁(δ=0.2mm)零件,材质为Inconel625高温合金。

互联网摘选

6、

Determination of Electron Density in Ar air Mixed Coolant Gas ICP

小功率空气-氩气混合气冷却ICP中电子密度的测定

互联网摘选

7、

The method to machine the parts made of stainless steel which adopts cooled air as coolant and a little plant oil as lubricant, is studied.

对采用冷风冷却微量植物油润滑切削加工不锈钢零件的方法进行了研究。

互联网摘选

8、

Check air filter and coolant level;

检查空滤芯和冷却剂液位;

互联网摘选

9、

Chemical Function of Water-based Coolant for Optical High-speed Fine Grinding

水基型光学高速精磨冷却液的化学作用

互联网摘选

10、

An Experimental Investigation of Heat Transfer in Rotating Coolant Channel

模拟涡轮旋转叶片冷却通道换热的初步实验研究

互联网摘选

11、

An air flow simulating test in the coolant channel of the core bottom of the 10 MW HTR module

10MW高温气冷反应堆堆底结构中的气体流动模拟试验

互联网摘选

12、

The two-year manufacture practice has confirmed the validity and feasibility of developed loxodrome coolant channel milling method.

经过两年多的实际生产过程应用,验证了所开发的斜航线冷却通道加工方法的正确性和可行性。

互联网摘选

13、

The internal coolant channel in an actual turbine blade was simplified into a variable cross-section channel with ribs and bleeding holes.

以航空发动机涡轮叶片中段内部冷却通道为研究对象,将其简化为带肋变截面U型通道。

互联网摘选

14、

Based on the damage mitigating control ( DMC), this thesis focuses on the damage analysis and control of the coolant channel ligament which is treated as one of critical components for the liquid-propellant rocket engines ( LRE) during a transiting operating condition.

针对减损控制技术,本文以液体火箭发动机为研究对象,视推力室冷却夹套隔片为易损部件,在发动机的转工况过程中,对其损伤进行分析与控制研究。

互联网摘选

15、

Importance of individual nuclides were compared during normal coolant release, gap release and core melt.

文章比较了正常冷却剂释放、间隙释放和堆芯熔化状况下不同核素对安全壳内辐射监测仪表示值的相对贡献。

互联网摘选

16、

In 2010 it ran out of the cryogenic coolant that enabled its primary mission of mapping the skies.

2010年其低温冷却剂消耗殆尽,而低温冷却剂是其绘制星云地图的必备。

互联网摘选

17、

Coolant mechanism cooling vat, for milk, incorporating a complete refrigerating unit or an evaporator of a refrigerating unit

冷却装置,冷却机理牛奶冷藏车,装有全套制冷装置或制冷装置蒸发器

互联网摘选

18、

Therefore, the materials for SG heat exchange tubes must meet stringent technical requirements, among which resistance to the corrosion in primary and secondary coolant corrosion is of the greatest concern.

因此,SG传热管用材必须满足苛刻的技术要求,其中最关键的是要满足在PWR运行温度范围内具有良好的抗一、二回路水介质腐蚀的能力。

互联网摘选

19、

Based on the study of how the inlet temperature and flow velocity of the secondary coolant and the thermoconductivity of the coil material affect the heat-conduction performance of the ice storage coil, we have designed and set up a new high-efficiency ice storage device.

研究了载冷剂进口温度、流速和盘管材料的热导率对蓄冰盘管传热性能的影响,并对完全冻结方式和不完全冻结方式的结冰和融冰过程作了比较。

互联网摘选

20、

Steam generator ( SG) is one of main equipments in the pressurized water reactor ( PWR) nuclear power plant, but also it is a pivotal equipment which brings heat from reactor core to the secondary loop coolant by primary loop water.

蒸汽发生器是压水堆核动力装置中的主要设备之一,也是把一回路冷却剂从反应堆堆芯带出的热量传给二回路水的关键设备。

互联网摘选

  • 今日热词
  • 热门搜索

简答网英语词典(dict.jiandongshicai.cn)为您提供在线翻译英语词典单词大全英译汉汉译英等英语服务!可按单词字数词义分类查询。支持lj:关键词格式查询例句。

用户反馈
请选择反馈类型(可多选):
您的联系方式:(如需回复请填写联系方式)
反馈内容:
提交成功 小编会尽快处理
回到顶部
点击反馈