1、

The problems of resolution and convergence are increased by classic methods such as FEM and WRM when the solutions exhibit sharp changes.

当在空间位置出现突变时,偏微分方程的经典解法如有限元法和加权残差法等无法保证解的精度和收敛性。

互联网摘选

2、

Formulae which couple the TWF method with FEM were given based on the stiffness matrix derivative method and Gauss-Chebyshev Quadrature.

本文将热权函数与有限元法直接耦合,给出了基于刚度阵导数法和Gauss-Chebyshev积分的热权函数计算格式。

互联网摘选

3、

Since repeated FEM or BEM analyses for every instant are avoided by using the TWF method, the calculation procedure is greatly simplified, and the efficiency is raised to a great deal.

由于免除了对每一时刻τ所需作的有限元或边界元分析,计算过程大大简化,计算效率得到极大提高。

互联网摘选

4、

The FEM calculation shows that with increasing loading rate, general yield load Pgy, stress and strain rate ahead of notches for the notched specimens increase.

有限元计算表明:缺口试样的整体屈服载荷Pgy,缺口前的应力,应变率均随加载速率的增加而增加。

互联网摘选

5、

The solidification process of liquid metal int he CASTEX technique was studied by FEM ( finite element method ).

利用有限元法研究了 连续铸 挤工艺中液态金属的动态凝固过程.

互联网摘选

6、

FEM encodes a polypeptide with two LRR domains and two F-Box domains.

FEM蛋白包含两个LRR结构和两个F-box结构域。

互联网摘选

7、

In this paper, the JFO condition, satisfied with global mass continuity, is incorporated into an universal Reynolds equation with micro-polar fluid which is solved for the oil film pressure using OSM and FEM.

本文采用满足全流场质量连续的JFO边界条件,采用微极性流体的广义雷诺方程来求解油膜压力分布,进而获得油膜承载力和粘性阻力等轴承动力特性量;

互联网摘选

8、

Nonlinear FEM Analysis of the Load Transfer Character of the Piles with Various Defectiveness

缺陷桩荷载沉降性状的非线性有限元分析

互联网摘选

9、

The FEM analysis for the effect of intermesh to plate leveling deformation

压弯量对轧件矫直变形影响的有限元分析

互联网摘选

10、

The FEM software ( ANSYS) is adopted for the strength analysis of slide block universal spindle.

滑块式万向接轴因其能在倾角较大情况下传递较大的扭矩而被广泛应用。

互联网摘选

11、

According to the structure character of hazardous waste landfill ( HWL) a finite element mode ( FEM) of HWL detection sealed space was established;

根据危险废物填埋场的结构特点,建立了检测层封闭空间的有限元模型;

互联网摘选

12、

Three dimensional rigid plastic FEM simulation of backward extrusion& application of local mesh densification

反挤工艺三维刚塑性有限元模拟及其局部网格细分技术的应用

互联网摘选

13、

Distribution of removed material in Fluid Jet Polishing ( FJP) was investigated in experiments. The characteristics of fluid velocity and pressure on the sample surface were simulated using Finite Element Method ( FEM) when the fluid jet impacts the work piece.

实验研究了液体喷射抛光技术的材料去除量分布特征,并利用有限元分析方法,分析了抛光头(液体柱)与工件表面相互作用时流场的分布特点。

互联网摘选

14、

Study on 3D-2D Mixed Sub-Region FEM

层合板三维-二维混合分区有限元法研究

互联网摘选

15、

FEM using adaptive topography and quadratic element in 2D MT forward modeling heating of an insulator by a high-frequency electric field.

自适应地形电磁场双二次变化MT二维有限元数值模拟用快速变化的电磁场对非导电体加热。

互联网摘选

16、

FEM Analysis and Study on the Masonry Gravity Dam with Weak Interlayers Embeded in the Foundation.

软弱夹层地基上浆砌石重力坝有限元分析研究.

互联网摘选

17、

In this paper, using FEM method to numerical simulate the elastic wave equation.

本文采用有限元法进行弹性波方程数值模拟.

期刊摘选

18、

ANSYS FEM used in the stress calculations of blower hub, which overcomes the limit of the classical method on the stress calculation of complicated surface, is an ideal, accurate calculation method for the simulation on the actual operation of rotor blower hub.

采用ANSYS计算汽轮发电机转子风扇座的应力,克服了经典计算方法对复杂变化曲面应力计算的局限性,是较理想地模拟转子风扇座实际运行工况的计算方法。

互联网摘选

19、

Internal force analysis with FEM can provide the foundation to choose the correct reinforcement scheme.

有限元内力分析的结果可为确定合理的加固方案提供依据.

互联网摘选

20、

Multiple load cases and calculating schemes of Baihetan arch dam is analyzed by use of3-dimentional finite element method ( FEM).

采用三维线弹性有限单元法对白鹤滩拱坝进行了多工况多方案分析研究。

互联网

  • 今日热词
  • 热门搜索

简答网英语词典(dict.jiandongshicai.cn)为您提供在线翻译英语词典单词大全英译汉汉译英等英语服务!可按单词字数词义分类查询。支持lj:关键词格式查询例句。

用户反馈
请选择反馈类型(可多选):
您的联系方式:(如需回复请填写联系方式)
反馈内容:
提交成功 小编会尽快处理
回到顶部
点击反馈