hardness的例句大全

So we must try to choose high hardness of press roll.

所以给只管即便拔取矮硬度的压辊.

互联网摘选

The hardness of anodic oxidation layer is higher, the tribological property of composite coating is better.

阳极氧化层的硬度越大, 复合膜摩擦学性能越好.

互联网摘选

When the aluminum content increases, the grain size of cold-rolled annealed panel becomes small, but the hardness, yield strength and tensile strength of stainless steel 439 increase.

随着439不锈钢合金成分中铝含量的增加，冷轧退火板的晶粒尺寸较小，硬度、屈服强度和抗拉强度升高。

互联网摘选

The hardness of black silicon carbide is greater than fused alumina but less than synthetic diamond.

硬度黑碳化硅大于熔融氧化铝,但少于人造金刚石.

互联网摘选

The styrene modified alkyd resin is featured by quick drying, high hardness and resistance to water.

该树脂涂膜快干 、 硬度高、耐水性好,同时具有与醇酸树脂相似的外观和耐冲击性能.

互联网摘选

Weld hardness is controlled ( including the heat-affected zone ) and maintained below 200 HB.

焊接硬度控制在 ( 包括热影响区域 ) 200HB以下.

互联网摘选

Results showed that hardness is a little different in the heat affected zone ( HAZ ).

结果表明,焊接热影响区具有较小的 硬度 差异.

互联网摘选

The results indicate : The coatings have prominent anti-sticking, hardness and adhesion power.

结果表明,该涂层具有优良的防粘性, 硬度和附着力.

互联网摘选

The adhesion , micro-hardness and abrasive resistance of the film were tested.

测定了其结合强度 、 显微硬度及耐磨性能.

互联网摘选

The Chen goat-hair-brush has the characteristic of being soft with hardness.

保存日久者,谓之“陈羊毫,它柔中有刚; ”

互联网摘选

The hardness of highlights oil and different light oil have different best curing temperature.

度高光油的硬度好,而且不同的光油有不同的最佳固化温度.

互联网摘选

Because of over-heated, hardness of part blade on the cutter is inadequate.

原有刀片刃口局部材料的硬度不够,材质脆性过大, 有过热现象.

互联网摘选

Before that, the micro forward extrusion die was designed and manufactured, and the design technology of micro-forming die was discussed. Furthermore, micro hardness tests on axial section of the formed parts were also conducted to study the inhomogeneous material flow scale effect.

本研究同时还设计、制造了微型正挤压模具，对微成形工艺模具设计进行了初步探讨。

互联网摘选

This paper researches law of tool material hardness affecting wear in ultrasonic machining.

通过试验研究了以硬度为主的材料性能对超声加工工具磨损影响的规律.

互联网摘选

The Nitrogen content distribution model of high temperature Nitriding can be inferred from atomic diffuse theory and Nitrogen layer hardness test result.

结合渗氮层硬度测试结果及原子扩散理论，推导出了无镍双相不锈钢高温渗氮层中氮含量的分布模型。

互联网摘选

The coating the wearing surface of andanti-wear layer with high surface hardness and excellent corrosion resistance.

膜层硬度高、耐磨性好,具有较优良的综合性能,解决了表面修复的难题.

互联网摘选

Strength in cutting-tool material is not always proportional to hardness.

切削刀具材料的强度并不都是与硬度成正比的.

互联网摘选

Effects of artificial ageing on the hardness distributions and strength were analyzed for6063 aluminum alloy joints welded by varying heat inputs.

对不同焊接热输入下的6063铝合金焊接接头进行人工时效，分析其硬度分布和强度的变化。

互联网摘选

Micro-hardness test and XRD spectra indicate that artificial ageing treatment at low temperature can further improve the mechanical property of the solid solution strengthening aluminum alloy after ECAP process.

显微硬度以及XRD测试结果显示低温时效处理进一步提高了强化固溶态高强铝合金ECAP加工后的机械力学性能。

互联网摘选

Excellent corrosion resistance with ESR-melted. 13 Cr-Mo stainless steel with high hardness.

耐磨蚀性优良的电渣重熔13铬钼不锈钢,不需施以镀铬.

互联网摘选