mold的例句大全

To make ( a phonograph record or videodisk) from a mold or matrix.

制版按模型或模板制造（唱片或录像片）

互联网摘选

Optimization of the Circular Cone Main Tube of Injection Mold

注射模圆锥形主流道的优化设计

互联网摘选

The applications of mold flow of computer simulation in MIM of cemented carbide

充模流动计算机模拟在硬质合金MIM中的应用

互联网摘选

Math Modeling of Mold Flux Flow Field in Meniscus Region

结晶器中弯月面区域保护渣液流场的数学模拟

互联网摘选

The basic features of the squeeze casting were described. The squeeze casting machine should possess the ability of smooth mold filling with low flow speed and large discharge quantity and increasing the squeezing pressure instantaneously.

叙述了挤压铸造的基本特点，对液态挤压铸造机要求具备低流速大流量平稳充填铸型和瞬时增压的能力。

互联网摘选

Filter the redundancy vertex in STL solid is very important. The algorithm is successful to deal with 3D graphic in realistic mold flow simulation software.

而剔除STL面片数据中的冗余顶点是重构的关键，该算法已经成功应用于三维真实感注塑模流动模拟软件的3D图形处理。

互联网摘选

Study on Effects of Heat Transfer Coefficient between Polymer and Mold on Melt Filling Flow in Micro Injection Molding

微注塑成型中熔体与壁面间传热系数对充模流动影响的研究

互联网摘选

Blowing argon gas had much effects on the mold flow field and temperature field.

向结晶器中吹入氩气后，对钢液的流场和温度场有较大的影响。

互联网摘选

Control of heat and mass transport in continuous casting mold through swirling flow in immersion nozzle

通过浸入式水口中的旋流控制连铸结晶器中热量和质量的传输

互联网摘选

CAE techniques ( such as plastic products mold flow analysis) are used for the post quality evaluation.

同时，采用产品模流分析等CAE技术对塑胶产品模具开发过程进行后期质量评估。

互联网摘选

Second, numerical simulation of filling, flow, air pocket, fusion trace, and warp were performed with simulation software Mold flow.

其次，利用仿真软件Mold flow对该注塑件进行充填、流动、冷却、气穴、熔接痕、翘曲等数值模拟。

互联网摘选

D Numerical Simulation on Mold Filling Coupling Fluid Flow and Heat Transfer in the Aluminium Alloy Casting

耦合传热与流动的铝合金铸件充型三维数值模拟

互联网摘选

But the little essential understanding for the feedstock mold flow in MIM and the complexity of nonlinear system leads to the little development of the theory. But It will, no doubt, become an important part of the future research.

但由于在实际中对MIM喂料充模流动的本质认识的限制和非线性系统的复杂性，使得这种理论的发展也受到一定的限制，但无疑它将是未来研究的重要方向。

互联网摘选

The distribution of mold flow field can be reflected by readings of thermocouples embedded into the copper plates.

结晶器专家系统上显示的结晶器流场分布可以直接通过镶嵌在结晶器铜板上的热电偶变化趋势来反映。

互联网摘选

Then the basic process to use Mold flow software to realize the numral simulation of the fusion polymer filling the mould cavity is introduced.

然后重点说明了用Mold flow软件，通过有限元的方法实现熔融聚合物流体充填模具型腔时数值模拟的基本过程。

互联网摘选

In this paper, based on the systematic analysis of the present situation of the sediment mathematical, a 1-D mathematical mold for unsteady flow and a non-equilibrium transportation model of non-uniform suspended load has been established to forecast the erosion and deposition.

本文在系统分析一维非恒定水流和泥沙数学模型研究现状的基础上，结合实际的天然河道冲淤预测的应用目标，建立了一维悬移质不平衡输沙数学模型。

互联网摘选

In this paper we report the analysis of underfill encapsulation between the solder ball, micro-chip and substrate by experiment and3D mold flow simulation.

文中主要探讨了覆晶封装底胶充填时，锡球、芯片及基板间的流动状况。

互联网摘选

To help dry the paper, the mold lets the water flow through the small wire squares.

为了使纸干得更快，这个模子会让水通过小的金属丝方块流走。

互联网摘选

The cooling effects of CCC is simulated using MPI software. The results show that conventional mold flow analysis software cannot fit the features of CCC cooling system by buried casting methods.

用MPI软件对随形水道冷却效果进行了模拟，结果表明常用模流分析软件不能适应埋铸法的特点。

互联网摘选

Mold temperature control Series auxiliary equipment such as injection molding machine Products.

模具控温系列等注塑机辅助设备产品.

互联网摘选