合金的例句大全

The article elaborates the cold welding technology which adopts austenitic stainless steel welding strip to desl with the casting defect of the bulky pearlite low-alloy steel valves.

文章阐述了较大体积的珠光体低合金钢阀门铸造缺陷，采用奥氏体不锈钢焊条冷焊修补工艺的分析和施焊过程。

互联网摘选

Strips of aluminum alloy windows tech window, which you love?

木窗铝合金窗塑钢窗, 你钟爱哪一种?

互联网摘选

Fiber Optical Corrosion Sensor ( FOCS) based on non-electrochemical technique was studied to detect Al alloy atmospheric corrosion.

针对铝合金大气腐蚀检测研究了基于非电化学技术的光纤腐蚀传感器。

互联网摘选

Hydrophilie property, corrosion resistance and heat resistance of the membranes on Al alloys were tested.

测定了该亲水膜层涂覆在铝合金表面的亲水性 、 耐蚀性和耐热性等.

互联网摘选

It can provide theoretical basis for achievement structure control deformation of aluminium alloy.

依据实验结果，可对LD10塑性加工时的微观组织及性能进行预测及控制，同时为实现铝合金组织控制变形提供了依据。

互联网摘选

We should put the alloy apart for a particular purpose.

我们应把这种合金留作特殊用途.

互联网摘选

The effect of counter-pressure casting parameters on secondary dendrite arm spacing ( SDAS ) of A 357 alloy was studied.

研究了不同工艺条件下,差压铸造不同工艺参数对A357合金二次枝晶间距的影响.

互联网摘选

Ltd who is specialized in the aluminum alloy gravity casting.

同时上属公司有慷龙精铸公司,主要以铝合金重力浇铸为主打.

互联网摘选

Die types are: plastic mold, stamping die, aluminum zinc alloy die-casting molds, blow molding die.

模具类型有: 塑胶模具 、 冲压模 、 铝锌合金压铸模具 、 吹塑模.

互联网摘选

Economic Continuous Melting and Degassing Furnace for Al Alloy

节能型铝合金连续熔化－去气炉

互联网摘选

System of vacuum degassing treatment of ferroalloy solution

铁合金熔液真空脱气处理系统

互联网摘选

Based on the laboratory results the industrial test of deoxidation of molten steel was done on 150 t with ferroalloy containing barium ladle furnace and vacuum degassing equipment.

在实验室研究的基础上，用150tLF/VD精炼设备进行了含钡合金对钢液脱氧的工业试验研究。

互联网摘选

Effect of Chill on Secondary Dendrite Arm Spacing of Aluminum Alloy Casting

冷铁对铝合金铸件二次枝晶间距的影响

互联网摘选

Numerical Simulation of Cellular/ Dendrite Arm Spacing Selection During Unidirectional Solidification of Ti-Al Alloy

Ti-Al合金定向凝固过程中胞/枝晶间距选择的计算机模拟

互联网摘选

Solute diffusion controlled solidification model was applied to simulate the initial stage cellular to dendrite transition of TiAl alloys during directional solidification at different velocities.

利用溶质扩散控制模型对TiAl合金定向凝固初始阶段变速过程中胞晶／枝晶转变进行了数值模拟。

互联网摘选

The experimental results showed that the microstructure of Cu 26.6wt% Mn alloy changed from cellular to dendrite, super fine cellular and segregation free solid with the increase of growth rate;

实验结果表明，重熔区组织较基体组织大大细化；随着生长速度的增大，Cu26.6wt%Mn合金的组织由低速胞晶向枝晶、高速胞晶及完全无偏析固溶体转变。

互联网摘选

Effect of wide change of cooling rate on dendritic segregation of a directionally solidified cobalt-base superalloy

宽变冷速对定向凝固合金枝晶偏析的影响

互联网摘选

The dendritic crystal grains of primary austenite were spheroidized and fined significantly after the alloy slurry flowed through the cooling slope plate.

合金液经倾斜板处理后枝晶状先共晶奥氏体得到了明显细化、球化。

互联网摘选

Using appropriate process parameters, the Cu-Al-Ni shape memory alloy with good surface quality and unidirectional dendritic crystal was prepared by the self-made ohno continuous casting equipment.

在自制的水平热型连铸设备（OCC）上，采用一定的工艺参数，制备出表面呈镜面，内部组织沿轴向定向排列的柱状组织Cu-Al-Ni形状记忆合金。

互联网摘选

The distribution of inhomogeneous thermo-emf along the copper-iron thermoelectrode is described as a stationary ergodic random process.

不均匀热电势沿铜铁合金热电极长度上的分布可描述为各态历经的平稳的随机过程。

互联网摘选