1、

Tests show that the test-bed is stable operation, can meet the intended function. A life simulation test is done in a vacuum test chamber for a different load and speed, test environment selected high and low temperature and room temperature in vacuum.

试验证明该实验台运行稳定,能满足预定功能。在真空高低温试验箱内进行了不同载荷和转速下轴承寿命模拟试验,试验环境选择了真空常温和真空高低温。

互联网摘选

2、

Numerical simulation on flow field of confined water jet at bottom hole

井底受限射流流场的数值模拟

互联网摘选

3、

The Evaluation of Flight Simulator Plans based on Gray Related Algorithm

基于灰色关联法的飞行模拟器方案评估

互联网摘选

4、

Aimed at ungraded network carbon compound in heavy cross-section bearing steel occur during the cooling process of being cooled, which is caused by slow cooling speed, simulation experiment was carried on to study rolled metal clipped from field by using of home-made equipment in the lab.

针对大端面轴承钢在轧后冷却过程中由于冷速过慢引起碳化物网状不合问题,利用实验室自制设备,对从现场剪取的轧材进行了模拟实验研究。

互联网摘选

5、

The natural and controlled cooling technologies for Q ( 235) rolled angle steel have been simulated by computer. The detector was set at UV 235 nm.

对轧后Q235角钢的自然冷却和不同方案下的控制冷却技术进行了计算机模拟。检测波长:235nm;

互联网摘选

6、

Estimation of frequency characteristics of shaking table test system and its application

地震模拟振动台试验系统频率特性估计的研究及应用

互联网摘选

7、

The simulating test, high temperature test, low temperature test and shaking test show that the quality of the apparatus is good and can meet the practical use.

经过模拟调试和高低温、振动试验,表明该仪能够满足实际应用的要求。

互联网摘选

8、

Crack Control of Mass Concrete Foundation of Large Scale Shaking Table

大型模拟地震振动台大体积混凝土基础施工裂缝控制

互联网摘选

9、

Its bearing capacity, coefficient of friction, and wearing value are measured by experiments.

通过滑道模拟实验,测定了这种滑道的承载力与压缩变形的关系,不同条件下静摩擦系数随正压力的变化关系,以及摩擦的时间效应、稳定磨损率。

互联网摘选

10、

Forecasting Berth Occupancy by Monte Carlo Simulation

运用模拟预测法&蒙特卡洛法确定泊位利用率问题的初步探讨

互联网摘选

11、

Numerical simulation of gas flow field in wearing resistance valves

耐磨风量调节阀气相流场的数值模拟

互联网摘选

12、

Simulation of Ordered Domain Interfaces Formed between DO_ ( 22) Phases in Ni-Al-V Alloy Using Microscopic Phase-Field Model

Ni-Al-V合金DO(22)相间有序畴界面的微观相场模拟

互联网摘选

13、

The nucleation of ordered phase is simulated by microscopic diffusion equation and the assumption of classical nucleation theory is examined.

利用微扩散方程对有序相成核过程进行计算机模拟,对经典理论的假设进行验证。

互联网摘选

14、

A concurrent permutation based multilevel matrix ordering strategy for parallel process simulation

针对复杂系统并行模拟问题的并发式多级矩阵重排算法

互联网摘选

15、

For validating the validity of PFS-A, we used Matlab software to simulate PFS and PFS-A in the condition of varying user amount and varying data service.

为了进一步验证PFS-A算法的有效性,使用了Matlab仿真软件在不同用户数量、不同数据业务的条件下对PFS算法和PFS-A算法进行了模拟仿真,并对仿真结果进行了分析论证。

互联网摘选

16、

It is investigated that the influence of Bauschinger Effect on yield strength of tube body by using four point bending test to simulate the tube making process at varying stress strain amplitudes.

采用X65钢板在四点弯曲加载条件下,模拟输油管制管过程中不同应变量下的应力&应变过程,研究包申格效应对输油管管体屈服强度的影响。

互联网摘选

17、

Numerical simulation of the beach cusp topography based on the self-organized theory

基于自组织机制理论的滩角地形数值模拟

互联网摘选

18、

Based on the analysis of simulated results, it revealed that tensile stress at the crack tip is the driving force for the crack propagation, and the heterogeneity of mechanical property of material among concrete influences greatly on the curvilinear of crack propagation path.

通过对数值模拟结果的分析,揭示出混凝土在拉伸条件下裂纹尖端的拉应力集中是裂纹扩展的动力,混凝土组成材料力学性质的非均匀性是造成裂纹扩展路径曲折的重要原因。

互联网摘选

19、

According to the missile trail with preset curvilinear motion, the missile exhaust plume is simulated by using particle system.

根据预置曲线运动导弹的轨迹,应用粒子系统对曲线运动导弹的尾焰进行模拟研究。

互联网摘选

20、

Numerical Simulation of a Cooled Turbine Curved Cascade Flow Field with Variable Specific Heat Being Taken into Account

考虑变比热的冷却涡轮弯曲叶栅流场的数值模拟

互联网摘选

  • 今日热词
  • 热门搜索

简答网英语词典(dict.jiandongshicai.cn)为您提供在线翻译英语词典单词大全英译汉汉译英等英语服务!可按单词字数词义分类查询。支持lj:关键词格式查询例句。

用户反馈
请选择反馈类型(可多选):
您的联系方式:(如需回复请填写联系方式)
反馈内容:
提交成功 小编会尽快处理
回到顶部
点击反馈