1、

The aseptic technique is used for the high-pressure reaction kettle for producing the polyaluminium chloride.

本发明用于生产聚合氯化铝用高压反应釜.

互联网摘选

2、

Cypermethrin microcapsules with urea-formaldehyde resin wall were prepared by in-situ polymerization process in aqueous medium.

以水为介质,脲醛树脂为壁材,用原位聚合法制备了氯氰菊酯微胶囊水悬浮液.

互联网摘选

3、

Organisms that cause polymer deterioration include bacteria, fungi, marine animals, and borers of various types.

能够造成聚合物劣化的生物体很多,如细菌 、 真菌 、 海生动物和各种蛀虫等.

词典精选例句

4、

You can use it as an aggregate or analytic function.

你可以将它作为聚合函数使用,也可以作为分析函数使用.

互联网摘选

5、

Under ultrasonic polyacrylic acid was synthesized with ammonium persulfate as initiator.

以过硫酸铵为引发剂,在超声波辅助下引发丙烯酸单体聚合.

互联网摘选

6、

The flocculation and coagulation of poly aluminum silicate sulfate on kaolin suspension is investigated.

研究了聚合硅酸硫酸铝对高岭土悬浮液的絮凝性能.

互联网摘选

7、

For this reason, developed a new glutinous elastic surface acting agent-non-polymer fracturing fluid.

为此, 研发了一种新型黏弹性表面活性剂无聚合物压裂液.

互联网摘选

8、

Suspended solid , oil cut and produced polymer increased the AP-P 4's adsorption capacity on sandstone.

悬浮物 、 含油率和残留聚合物使AP-P4在砂岩上的吸附滞留量增大.

互联网摘选

9、

Methyl-methacrylate and butyl methacrylate are used as basic monomers to copolymerize into acrylic resin.

以甲基丙烯酸甲酯和甲基丙烯酸丁酯为主要单体,共聚合成丙烯酸树脂.

互联网摘选

10、

Compared with non-crosslinkable acrylic polymer emulsion, the title emulsion had much more improved film properties.

对乳液膜性能的研究结果表明,交联反应极大地提高了聚合物的耐水 、 耐溶剂性及断裂强度.

互联网摘选

11、

The initiation of the polymer immobilized initiator was investigated through the polymerization of methyl acrylate.

并研究了此引发剂引发丙烯酸甲酯的聚合反应.

互联网摘选

12、

The crosslinked polymers show highest absorbing power for benzene of 5 solvents tested.

交联聚合物用作吸油树脂,在所考察的5种溶剂中对苯的吸收率最高.

互联网摘选

13、

Polymers give plastic its ability to be shaped and its strength.

聚合体使塑料具有可塑性和韧性.

互联网摘选

14、

In the experiment, nuclear boiling, the convergence and break up of liquid-plug and vapor-slug were observed.

实验中观察到核态沸腾 、 汽液塞的聚合、破碎以及振荡等主要现象.

互联网摘选

15、

Contraction flow behavior contributes significantly to the orientation and structure of molecular in micro injection molding.

聚合物流体的收缩流动行为是微注射成型工艺过程中影响分子取向与结构的重要因素.

互联网摘选

16、

Three ID Mn ( II)-azido coordination polymers ( 1-3) and a 2D molecular-based magnet ( 8).

含μ-1,3(EE)和μ-1,1(EO)叠氮桥的Mn(Ⅱ)配位聚合物(包括一个分子基磁体)。

互联网摘选

17、

XPS and FTIR measurements showed that there was still a great amount of residual azido groups on the surfaces of the functionalized MWNTs after clicking three layers of polymers.

XPS和FTIR测试表明,在接枝三层聚合物后,碳纳米管的表面仍然有大量的剩余叠氮基团。

互联网摘选

18、

The contributions above will offer atheoretical basis and technical guidance to the research on reputation mechanisms underthe setting of autonomous resource aggregation over Internet.

文章的这些贡献将给现代互联网环境下自治资源聚合中信誉机制的研究与设计提供理论依据和技术指导。

互联网摘选

19、

Mingling C 60/ C 70 and asphalt with alkyd varnish at the same time, the absorbance of the polymerization film decreased nonlinearly with the increase in wavelength in the range of 350-760 nm, and also the strength of the film was improved.

将C60/C70和沥青同时掺入醇酸清漆中,聚合后薄膜的吸光度在350~760nm波段随波长的增加而呈非线性下降,同时薄膜的强度也有所提高。

互联网摘选

20、

A thermoplastic resin obtained by polymerization of indene and coumarone; used in coatings and paint and asphalt tile.

一种热塑性树脂,聚合茚和香豆酮制成,用于涂层、油漆和沥青砖。

互联网摘选

  • 今日热词
  • 热门搜索

简答网英语词典(dict.jiandongshicai.cn)为您提供在线翻译英语词典单词大全英译汉汉译英等英语服务!可按单词字数词义分类查询。支持lj:关键词格式查询例句。

用户反馈
请选择反馈类型(可多选):
您的联系方式:(如需回复请填写联系方式)
反馈内容:
提交成功 小编会尽快处理
回到顶部
点击反馈