The present state of non asbestic friction material production in China and requirement in early years of21st century are presented.

1、

Present state of non asbestic friction materials for the use of automobiles in China

我国汽车用非石棉摩擦材料的现状

互联网摘选

2、

Tenon-typed Flange Asbestine Mat of Large-standard Made by Helix Method And Its Application

螺旋法制做大规格榫槽型法兰石棉垫及应用

互联网摘选

3、

Study on Properties of Ablation Material Based NBR Reinforced by Bakelite/ Asbestine

酚醛/石棉增强丁腈基烧蚀材料性能研究

互联网摘选

4、

The study on asbestine fiber for property of ablation coating based on epoxy resin

石棉纤维对环氧基耐烧蚀涂料性能影响研究

互联网摘选

5、

Research on the New Weaving for Asbestos Blanket

石棉毛毯织造工艺流程探讨

互联网摘选

6、

When the thickness of asbestos board reaches 30 mm, the shell temperature could be controlled below 360 ℃, which is lower than the creep temperature of the shell material, and the thermal expansion stress of the shell is only 50% of that without asbestos board.

当石棉板厚度为30mm左右时，炉壳温度可以控制在360℃以下；低于炉壳材质的蠕变温度，炉壳所受到的热膨胀应力仅为没加石棉板时的50%。

互联网摘选

7、

Ltd. The calculation indicates that converter heat insulation layer thickness of asbestos board is about 30 mm. The converter shell temperature can be controlled within 360 ℃, which is lower than the creep temperature of shell material.

对重钢50t转炉进行了炉壳（炉身段）温度场分析，计算表明：转炉隔热层石棉板的厚度为30mm时，炉壳温度就能控制在360℃以内，低于炉壳材质的蠕变温度。

互联网摘选

8、

The main cause of deformation of a converter shell is temperature rising of the converter shell, a economical and effective method to reduce the temperature and creep deformation is adopting a heat insulation layer of asbestos board.

转炉炉壳温度升高是炉壳变形的主要原因，采用内衬石棉板隔热是降低中小型转炉炉壳温度、减轻炉壳蠕变变形的经济有效措施之一。

互联网摘选

9、

The thermal conductivity of heat insulation materials, containing vacuum rubber board, asbestos board and quartz glass etc. was tested at different average temperature with RDL 1 automatic measuring apparatus made by ourselves.

用自行设计的RDL-1型物质热导率自动检测仪测试了真空橡胶板、石棉板等材料在不同温度下的热导率；

互联网摘选

10、

Silk Degumming with High Temperature and Pressure and Finish of Cotton Fabrics with Sericin; board machine for making paperboard, asbestos board or asbestos-cement boards

蚕丝的高温高压脱胶及纯棉织物的丝胶整理纸板、石棉板或石棉水泥板制板机

互联网摘选

11、

Calculating the effective thickness of converter asbestos board

转炉有效石棉板厚度的计算

互联网摘选

12、

Asbestos board divided into asbestos insulation board, asbestos by rubber sheets, asbestos floor slab.

石棉板分为石棉保温板、石棉橡胶板、石棉水泥板。

互联网摘选

13、

Board machine for making paperboard, asbestos board or asbestos-cement boards

纸板、石棉板或石棉水泥板制板机

互联网摘选

14、

Study on Production Process Formula for Asbestos-Cement Sheet

石棉纤维水泥瓦生产工艺配方的研究

互联网摘选

15、

Corrugated asbestos cement sheet roofing

石棉水泥波形瓦屋面

互联网摘选

16、

Vacuum Forming for Asbestos Cement Sheet Study on PCR-chip integrated

石棉水泥板的真空成型集成型PCR芯片的研究

互联网摘选

17、

Vacuum Forming for Asbestos Cement Sheet

石棉水泥板的真空成型

互联网摘选

18、

With asbestos cement mortar pipe being used as inner liner, concrete is cast to form hollow slab.

以石棉水泥砂浆离心管作为内模衬管，浇筑混凝土后构成现浇混凝土空心板。

互联网摘选

19、

The graphite molded packing, the asbestos thread PTFE-greased braided packing and the carbon-fibre braided packing were tested and the coefficients of a cycle ring were experimentally determined.

以膨胀石墨模压成型填料、石棉线浸渍聚四氟乙烯编织填料和碳素纤维编织填料为试验样品，实验确定了单圈填料的侧压系数。

互联网摘选

20、

The products consist of asbestos, rubber and packing, and are make by compression.

本产品是选用优质石棉、橡胶及填料，经过滚压制成的衬垫密封填料。

互联网摘选