mold的例句大全

CAE techniques ( such as plastic products mold flow analysis) are used for the post quality evaluation.

同时，采用产品模流分析等CAE技术对塑胶产品模具开发过程进行后期质量评估。

互联网摘选

Second, numerical simulation of filling, flow, air pocket, fusion trace, and warp were performed with simulation software Mold flow.

其次，利用仿真软件Mold flow对该注塑件进行充填、流动、冷却、气穴、熔接痕、翘曲等数值模拟。

互联网摘选

D Numerical Simulation on Mold Filling Coupling Fluid Flow and Heat Transfer in the Aluminium Alloy Casting

耦合传热与流动的铝合金铸件充型三维数值模拟

互联网摘选

But the little essential understanding for the feedstock mold flow in MIM and the complexity of nonlinear system leads to the little development of the theory. But It will, no doubt, become an important part of the future research.

但由于在实际中对MIM喂料充模流动的本质认识的限制和非线性系统的复杂性，使得这种理论的发展也受到一定的限制，但无疑它将是未来研究的重要方向。

互联网摘选

The distribution of mold flow field can be reflected by readings of thermocouples embedded into the copper plates.

结晶器专家系统上显示的结晶器流场分布可以直接通过镶嵌在结晶器铜板上的热电偶变化趋势来反映。

互联网摘选

Then the basic process to use Mold flow software to realize the numral simulation of the fusion polymer filling the mould cavity is introduced.

然后重点说明了用Mold flow软件，通过有限元的方法实现熔融聚合物流体充填模具型腔时数值模拟的基本过程。

互联网摘选

In this paper, based on the systematic analysis of the present situation of the sediment mathematical, a 1-D mathematical mold for unsteady flow and a non-equilibrium transportation model of non-uniform suspended load has been established to forecast the erosion and deposition.

本文在系统分析一维非恒定水流和泥沙数学模型研究现状的基础上，结合实际的天然河道冲淤预测的应用目标，建立了一维悬移质不平衡输沙数学模型。

互联网摘选

In this paper we report the analysis of underfill encapsulation between the solder ball, micro-chip and substrate by experiment and3D mold flow simulation.

文中主要探讨了覆晶封装底胶充填时，锡球、芯片及基板间的流动状况。

互联网摘选

To help dry the paper, the mold lets the water flow through the small wire squares.

为了使纸干得更快，这个模子会让水通过小的金属丝方块流走。

互联网摘选

The cooling effects of CCC is simulated using MPI software. The results show that conventional mold flow analysis software cannot fit the features of CCC cooling system by buried casting methods.

用MPI软件对随形水道冷却效果进行了模拟，结果表明常用模流分析软件不能适应埋铸法的特点。

互联网摘选

Mold temperature control Series auxiliary equipment such as injection molding machine Products.

模具控温系列等注塑机辅助设备产品.

互联网摘选

The results show that the copper alloy density by permanent-mold casting attains 99.91 % of theory density.

结果表明:经金属型铸造的铜合金密度达到理论密度的99.91%.

互联网摘选

The mold-closing part was the key component of plastic molding.

合模部件是塑料注射成型机的关键部件.

互联网摘选

Injection mold design for knife and fork parts based on Pro/ E EMX

基于Pro/E EMX的刀叉零件注塑模设计

互联网摘选

The correction mold of incomplete quadratic plate element

不完全双二次板元的修正型

互联网摘选

To shape molten metal by pouring into a mold to produce an ingot or cast slab.

将熔融的金属倒进模子里成型,以制成锭铁或扁钢锭.

互联网摘选

In-mold stainless mesh prevents penetration and increase moisture absorption and heat transpiration.

一体成型之不锈钢网,防穿刺,且提高吸湿散热效果.

互联网摘选

Metallurgy A channel along which molten metal is poured into a mold ; a gate.

使熔化了的金属注入模子的渠道; 通道.

互联网摘选

If the mold spray is sticky, reduce the silicate.

如果脱模剂发粘, 则减少硅酸盐.

辞典例句

Add to the mold, and cast from molten iron, then finished, to be the ideal product.

放入摸具中, 用铁水浇筑而成, 而后开展精抛光, 从而得到理想的商品.

互联网摘选